High strength Convex node steel plastic what is geogrid - GSZ-2 43

High strength Convex node steel plastic what is geogrid

1.High tensile strength modulus
2.Solder peeling force 500 N
3.Tensile strength:30~150kN
4. Width: 2~6m

Convex nodesteel plastic geogrid

1. Product introduction

Convex nodesteel plastic geogrid is a suitable for new construction requirements of the new steel plastic geogrid, steel wire through the high density polyethylene wrapped into high strength strips, welded by ultrasound, and according to the needs of the project to use different aperture and number of steel to change with pulling force.Through theproduction process to the plastic surface processing, node welding pressed into protruding node, make node is an organic whole, thus greatly improves the solder joint strength, improve with surfacecoefficient of friction, the role of the geogrid has made the resistance of the horizontal shear strength from feeding. Improve the bearing capacity of soft foundation,prevent failure surface of soil formation, and meet the requirements of the project of the nodal strength.

2. Product performance

1: Large tension:every meter vertical and horizontal limit tensile strength can reach 20-150 KN above, and inspected by the transportation, railway, water conservancy three department finished product quality supervision and inspection center.

2:Little deformation: convex nodesteel plastic geogrid, the elongation ≤ 3%

3:Node high strength: convex node steel plastic geogrid, the convex connection point is joint by smelting, the node high strength, welding grid node shear strength ≥1.5 MPa, convex node grid node dissection force ≥500 N

4:Long life: high strength steel wire is to protect the plastic material, also is the geogrid stress material, the scientific formula has anti-aging, oxidation resistance, suitable for all kinds of permanent engineering, service life of up to one hundred years

5:Goodeffect: gridmesh rooted convex node structure, enhance lock effect with grid andgeotechnical, it can constraints of soil lateral displacement, enhance the foundation bearing capacity, reduce the soil settlement and improve the uneven settlement, enhance the overall performance of the foundation, and prevent surface craze.

6:Low cost: through some engineering examples prove, it compare with to use the material construct reinforcement engineering with traditional way of similar projects, it can save cost 10-50%

7:It's simpletolay and orientation, easy to level off. 2 to 6m in width, joint less, can wear lock connection,short construction period.

3. Technical data

4. Production and Engineering

5. More pictures of our goods

...