high quality Exterior Facade Wall Panel - WY-098

Exterior Facade Wall Panel IN CHINA

This product adopts the inorganic materials for production, using the most advanced way of thin-wall high strength reinforced concrete note pressure, through the difficult vacuum processing and thermal insulation board one-time mechanical pour model of waterproof, fire prevention, facing, heat insulation, corrosion resistance, crack one plate.

Fast construction, working procedure specification, light weight and reliable, do not effect a wall structure bearing, can be equipped with a variety of facing adornment effect, break through the traditional product craze, fall off, the fire and the malpractice of the seepage, has conquered these difficult technical problems.

This kind of new product has three layers:

1, EPS layer: 20-100mm

2,mortar layer:3-5mm

3,Surface finish: lacquer finish

Colorful paint finishes

Basic specification

Installation process

1)posit the reference line to ensure installation formally.

2)deploy the silicone sealant glue equality by using machine.

3)Paste the cement mortar. It means paste the finished cement mortar on the wall combining surface around the frame evenly, and then hit five points in the middle of uniform to keep it more fastness

4)Put the wall board one the wall which is posited reference line, and then use the glue hammer to hit all round lightly, to confirm it keep evenly and completely.

5)Paste textured paper throughthe board edge, which is required to be smooth, vertical and horizontal, leaving side. To prevent the pollution from the glue

6) Stick on the first silicone sealant

This step can wrapped the anchor into the silicone sealant to protect the anchor.

7)Install anchor

After paste the wall board 24 hours, hit a hole with hole punch on the four board of adjacent cross location. And then install the anchor to ensure reinforcement.

8)Stick on the second silicone sealant

Using the glue gun to spray the uniform amount of the glue into the dividing joint , and then use the "U" shaped blade to scrap the res

9)Cleaning the board , removing the protective film

10)Project acceptance

Pattern showing

The patterns can be designed as customer's requirement

Application

EPS panels are widely used in construction, insulation, packaging, frozen, daily necessities, industrial casting etc. And also can be used to exhibition venue, cabinet, advertising signs and toys making. At present, in order to meet the national building energy efficiency requirements, the boards are mainly used in the wall exterior insulation, wall insulation, floor heating.