High Quality Black Clay Brick - LQ-2
Place of Origin: Shandong China (Mainland) | Brand Name: LQ Brand | Model Number: LQ-2 | Type: Clay Bricks |
Porosity: Solid | Size: 200*100*50mm | Color: Multicolor | Function: Acid Resistance Bricks,Firebricks |
Feature: Angle Bricks,Thin Bricks | Technique: Sintered |

High Quality Black Clay Brick is detailed as follow :
Product performance:
Thickness mm | 40 | 50 | 60 |
Flexural strength MPa | More than 4.5 (Suitable for pedestrian trails) | More than5.0(Suitable for light lane) | More than5.5(Suitable for heavy-duty lane) |
Size mm | 200*100; 230*115; 240*120 | ||
Compressive strength | More than50 | ||
Wear resistance | Grinding pit length not greater than 55mm | ||
Frost resistance | 25 freeze-thaw cycles , the dry mass loss does not exceed 2% |
Fired brick edge:
A:Strength and life:
Compression value of minimum national standards of flooring materials ≥ 23Mpa cement brick is about 30 Mpa , we fired brick ≥ 50 Mpa for this reason that much longer than the cement brick life of about 3 to 5 times .
B:safe and environmentally friendly
The fired brick mainly shale , fired at high temperature surface glazing , do not fade , non-radioactive . Has good permeability , water retention , and regulation of air humidity , effectively alleviate the urban heat island effect .
C:Economic and Culture
Although the one-time investment is large compared to the cement block , but the beauty of the building with the passage of time will not disappear late , there is no need frequent maintenance . Even if the ultraviolet radiation , acid rain , brick colors never fade , but more purely aesthetic still . The initial investment diluted to a long period of time reflects the value of each investment .
General Information:
Fireclay bricks are made from clinker clay by mixing, forming, drying, sintering and machining. The Al2O3 content ranges from 36% to 42%.
Fireclay bricks feature stable mechanical strength and good thermal shock resistance, withstanding high temperature up to 1750.
They are commonly applied as refractory lining directly exposed to heat or backup insulation layer in all kinds of industrial kiln or laboratory furnace.
Tech Data:
item | LQ-32 | LQ-34 | LQ-36 | LQ-37 | LQ-38 |
AI2O3(%) | 38 | 42 | 50 | 65 | 70 |
Fe2O3 (%) | 3 | 2.5 | 2.5 | 2.4 | 2 |
Refractoriness (SK) | 32 | 34 | 36 | 37 | 38 |
Refractoriness under load, 0.2MPa, Ta, ((°C) | 1300 | 1350 | 1450 | 1550 | 1580 |
Porosity (%) | 26 | 25 | 24 | 23 | 23 |
Bulk density (g/cm³) | 2.05 | 2.1-2.15 | 2.3-2.4 | 2.4 | 2.5 |
Cold crushing strength (MPa) | 25 | 25 | 45 | 45 | 51 |
Thermal expansion at 1000°C (%) | 0.6 | 0.6 | 0.3 | 0.5-0.7 | 0.6 |
Picture:
P1:
P2:
P3:
P4:
Packaging Detail:wooden pallets,using straps and plastic film. the size of wooden pallet is 95x95cm,95x100cm or as your requirements. |
Delivery Detail:20 days |