High-quality and low price HDPE Geomembrane Liner - 0.3mm~2.5mm
Type: Geomembranes | Place of Origin: Shandong China (Mainland) | Brand Name: ANKANG | Model Number: 0.3mm~2.5mm |
Material: HDPE,LDPE,LLDPE,EVA |

Specifications:
Thickness: 0.5 to 3.0mm
Width: 2 to 7m
Type: smoothed geomembrane, textured geomembrane
Materials: polyethylene (HDPE, LLDPE),
Features:
Low permeability
HDPE lining systems are secure because leachate does not penetrate them
Methane gas will not escape from the HDPE cover system
Rainwater will not infiltrate an HDPE cap
Chemical resistance
HDPE, resistant to a wide range of chemicals, is not threatened by typical solid or hazardous waste leachates
Suitable for sludge and secondary containment around chemical storage facilities
Ultraviolet resistance
HDPE's resistance to UV exposure is further enhanced by the addition of carbon black
Additionally, with the absence of plasticizers, volatilization is not a problem
Reflective factor
Geotec offers its HDPE geomembranes in white and black
A white surface helps mitigate liner temperature extremes and aids visual inspection
Smooth HDPE Geomembrane(HTPLASTIC) is a black,high quality,high density polyethylene geomembrane produced from specially formulated,virgin polyethylene resin.The polyethylene resin is designed specifically for flexible and durable geomembrane applications,it contains approx.98% polyethylene,2% carbon black and trace amounts of antioxidants and heat stabilizers,dimensional stability and thermal agin characteristics,HT PLASTIC Geomembrane has excellent resistance to UV radiation and is suitable for exposed applications.These product specifications(more than 1.0mm) meet and equal to GRI-GM13 standard.
Properties | Test Method | Average Values | ||||
Thickness,mm | ASTM D5199 | 0.5 | 1.0 | 1.5 | 2.0 | 2.5 |
Density,g/cm3 | ASTM D792 | 0.94 | ||||
Melting Index.g/10min | ASTM D1238 (190Degrees/2.16KG) | 1 | ||||
Strength at Break,kN/m | ASTM D638 (at 50mm/min) | 14.5 | 30 | 40 | 54 | 69 |
Elongation at break,% | ASTM D638 (at 50mm/min) | 700 | 700 | 700 | 700 | 700 |
Dimension Stability(%) | ASTM D1204 (100Degrees,1hour) | +/-2 | ||||
Carbon Black Content, | ASTM D1603 | 2-3 | ||||
Tearing Strength,N | ASTM D1004 | 73 | 138 | 210 | 275 | 330 |
Puncture Strength,N | ASTM D4833 | 159 | 316 | 475 | 636 | 793 |
Oxygen Induction Time,min | ASTM D3895 | 100 | ||||
ESCR(Hours) | ASTM D1693 | 1500 | ||||
Absorption Rate,% | ASTM D570 23 Degrees | 0.1 | ||||
Water pressure resistance,Mpa | ASTM D751 | 1.0 | 2.2 | 3.1 | 4.1 | 5.2 |
Coefficient of Expansion(mm degrees) | ASTM D638 | 1.2X10-4 | ||||
Landfilling Test(%change) | ASTM D3083 | +/-5 |
HDPE GEOMEMBRANE STANDARD: GBT 17643-1998 | |||||
ITEM | 0.5MM | 0.75MM | 1.0MM | 1.5MM | 2.0MM |
Density | 0.94g/ m3 | ||||
Tensile strength MPA | ≥17 | ||||
Breaking elongation % | ≥450 | ||||
Tear resistance kn/m | ≥80 | ||||
Water permeability g.cm/ cm2.s.pa | ≤1.0 x 10-16 | ||||
Carbon Black Content % | 2.0-3.0 |
Packaging Detail:Woeven Fabric for Each Roll |
Delivery Detail:15DAYS After order confirmation |