HDPE Geomembrane for landfill projects - 0.2mm to 3.0mm

HDPE Geomembrane we could produce from thickness 0.3mm to 3.0mm...the width is from 2m to 7m,the length from 50m to 100m.. - details see: https://www.buildingsupplieshub.com/hdpe-geomembrane-for-landfill-projects-10057559

Type: Geomembranes	Place of Origin: Shandong China (Mainland)	Brand Name: prettylion	Model Number: 0.2mm to 3.0mm
Material: HDPE,LDPE,EVA	standard: ASTM,G/B	manufacturer: Factory,ISO9001,BV certificate

contact supplier for HDPE Geomembrane for landfill projects

HDPE geomembrane,a waterproof material,compound with geotechnological fabric and geomembrane , it is used for draining off water and adding the muscle mainly. It divides into one cloth one membrane and two cloth first membrane,width 4-6m,weight range is 200-1500g/m2.

The hdpe geomembrane is against drawing, tearing resistance,and high CBR plunger strength, can meet the need of civil engineering such as water conservancy , municipal administration,building,traffic,subway,tunnel etc.Because of selecting high polymer materials for use and adding the aging-resistant materials in the production technology, it can use in the unconventional temperature environment.

Technical Data

Item and Art No.	PLD0601	PLD0602	PLD0603	PLD0604	PLD0605	PLD0606	PLD0607
Unit weight, g/m²	400	500	600	700	800	900	1000
Break strength, kN/m	5	7.5	10.0	12.0	14.0	16.0	18.0
MD/CD CBR Plunger Strength,kN	1.1	1.5	1.9	2.2	2.5	2.8	3.0
Tear strength, kN	0.15	0.25	0.32	0.40	0.48	0.56	0.62
Film thickness,mm	0.25-0.35			0.3-0.5

HDPE Geomembrane

Features:
1.All physical factors such as anti-draw, anti-tear, and anti-stab meet the requirement of water works, chemicals, tunnels, and transportation project in most conditions.
2.Good aging, durable performance, and wide temperature arrange, it can be useful over thirty years on the condition of -60æ«60æ.
3.Anti-stab and fine friction factors.
4.Canker proof, acid and alkali proof, untoxic.
5.Lower cost per unit area, cost is 1/3«1/2 lower than that of PVC film, glass and cloth.
6.Convevient to install and dependable effect.
Specification:
Breadth:4-14m Thickness:0.18-1.5mm

Technical Data

Art No.	PLC0701	PLC0702
Item and Type	GL LDPE	GH H(Mid)DPE
Material	GL-1 GL-2	LDPE
Thickness Range (mm)	0.20mm-2.0mm	0.20mm-2.0mm
Carbon Content(%)	≥2%	≥2%
Environment Stress Crack Resistance	G/B STANDARD	G/B STANDARD	≥1500
Oxidation Inducing Time at 200°C	G/B STANDARD	G/B STANDARD	≥20
Tensile Strength (Mpa)	≥14	≥17	≥25
Elongation (%)	≥400	≥450	≥550
Right Angle Tear Strength (Mpa)	≥50	≥80	≥110
Vapor Permeation (g.cm/cm2.s.pa)	≤1.0x10^-16	≤1.0x10^-16
Soft Point(°C)	>90
Crack Temperature(°C)	<-70	<-70
FilterCoefficient(cm/s)	≤10^-12	≤10^-12