Good Quality Natural or Engineered Teak Plywood - DX-P200

Teak plywood

1220x2440mm, 915x2135mmor as clients requirement

1.8~25mm

+/-0.2mm (thickness<6mm), +/-0.3~0.5mm (thickness≥6mm)

Natural or engineered teak face and back or teak face and hardwood back, such as burma teak or zebra teak (There also have other natural or engineered veneers of more than 100 kinds available. Such as, birch, mahogany,ash, sapele, walnut, oak, maple, beech, cherry, red rose, ect.)

Sanded, UV coated, smoked orembossed

Q/C or C/C

Poplar, hardwood,eucalyptus,okoume, birch, pine, combi, ect.

Overlap joint, end joint, scarf joint or finger joint

E0, E1, E2, MR, Melamine or WBP

A, AA or AAA

500~680kg/m3

Technical Parameters

Moisture Content

10%~15%

Water Absorption

≤10%

Modulus of Elasticity

≥5000Mpa

Static Bending Strength

≥30Mpa

Surface Bonding Strength

≥1.60Mpa

Internal Bonding Strength

≥0.90Mpa

Screw Holding Ability

Face

Edge

Fancy plywood is widely used for furniture and interior decoration.With good properties, such as, easy polishing and painting, easy fabricability, high bending strength, strong screw holding ability, heat resistant, anti-static, easy cleaning, long-lasting and no seasonal effect.

Packing

Standard Export Pallet Packing

Inner Packing

Pallet is wrapped with a0.20mmplastic bag

Outer Packing

Pallet is covered with plywood or carton and then PVC/steel tapes for strength

Loading Quantity

8pallets/22cbm

16pallets/42cbm

18pallets/53cbm

1x20’FCL

5000cbm/month

T/T or L/C at sight

Within 15 days after receiving deposit or original L/C at sight

ISO9001:2000, CE, CARB