Geocell for soft soil foundation and protection - YD-GE-01

Geocell:, *It is a net-shaped cell structure made by welding high intensity thermoplastic sheet, *Fix railway ground,weak ground - details see: https://www.buildingsupplieshub.com/geocell-for-soft-soil-foundation-and-protection-10058168

Type: Geocells	Place of Origin: Hebei China (Mainland)	Brand Name: Yunde	Model Number: YD-GE-01
Material: HDPE

Geocell for soft soil foundation and protection

contact supplier for Geocell for soft soil foundation and protection

HDPE Geocell for roadbed, slope

It is made of welding high tensile HDPE broad bands. It has many cells and is very flexible.

It can be divided into four types:

1. smooth surface without hole

2. smooth surface with hole

3. textured surface with hole

4. textured surface without hole

It can be replicated when transported and stretched to be filled with stones and soil when used, which can be as cushion coat to reinforce the soft base , and also to protect the slope when laid in the slope surface.

Product Introduction:
It is flexible: folded during transportation, stretching out and being filled with stone or concrete during service, and forming into struct with powerful lateral confinement and rigidity. It can be used as cushion coat to strengthen loading capacity of weak ground or slope protection structure, as well as stop structure, and so on.

Functions:
1.It Fix railway ground.
2. Fix weak ground of roads.
3. Block loading capacity.
4. Treat river way of shallow water.
5. Act as support in pipeline and sewer.
6. Act as comprehensive block stopping land sliding and bearing loading capacity.
7. Act as independent wall, dock and break-water.
8. Treat desert, beach, riverbed and bank.

Performance parameter of geo-cell:

Specification Model	Tensile yield strength of the cell(MPa)		Tensile strength at the welding joint(N/cm)		Tensile strength at the joint of cell froup middle place(N/cm)		Tensile strength at the joint of cell group edge(N/cm)
	PP Material	PE Material	PP Material	PE Material	PP Material	PE Material	PP Material	PE Material
TGLG-50-400	≥23.0	2≥0.0	≥100	≥100	≥120	≥120	≥200	≥200
TGLG-100-400
TGLG-150-400
TGLG-200-400

Model/Item	Width (cm)	Length(cm)	Height(mm)	Welding pitch(mm)	Thickness(mm)	Mass area ratio g/m2	Solder joint peel strength(N/mm)	Connection peel strength(N/mm)	cell yield strength(N/mpa)
TGGS 50-400	600	400	50	400	1	550	10	10	18
TGGS 75-400	600	400	75	400	1	850	10	10	18
TGGS 100-400	600	400	100	400	1	1100	10	10	18
TGGS 150-400	600	400	150	400	1	1600	10	10	18
TGGS 200-400	600	400	200	400	1	2200	10	10	18