Geerda K11 Elastomeric Roof Waterproof Coating - GED4002

1.Good flexibility and bond strength, 2.Good permeability, 3.Waterproof excellent, 4.Wide range of applications - details see: https://www.buildingsupplieshub.com/geerda-k11-elastomeric-roof-waterproof-coating-10100249
Type: Other Waterproofing MaterialsPlace of Origin: Guangdong China (Mainland)Brand Name: GeerdaModel Number: GED4002
State: liquid and powderApplication method: brush and sprayComponent: AcrylicStatus: Water based
Fuction: WaterproofFlexibility: ExcellentAdhesion: GoodAir Permeability: Good
Weather Resistance: GoodAging Resistance: Good  
Geerda K11 Elastomeric Roof Waterproof Coating
contact supplier for Geerda K11 Elastomeric Roof Waterproof Coating


Geerda K11 Flexible waterproof coating

Product Description

K11 Flexible waterproofcoating is a two-component acrylic polymer modified cement-based waterproof materials.This material is composed ofhigh-gradecementandpolymer powder,selectedauxiliariesand liquid high-polymer additives. The powderhas a active reaction withadditives, which, formsa layer of tough, elastic waterproof membrane.Thismembranehas a good adhesion to concrete and mortar,preventing thewaterfrominfiltration.

Features

1.Good flexibility. Itcan withstand micro-cracksand slight vibrationofthebuilding.

2.Can be paint on the surface of a dry or wet base.

3.Strong adhesion.

4.Excellent waterproof performance,weather resistance and aging resistance.

5.Good air permeability.

6.Non-toxic, harmless, environment-friendly.

Applied Range

Roof, floor, wall, tunnel, bridges, kitchen, reservoir, basement, bathroom, swimming pool, waterproof construction.

Construction Point

1.Before painting, the surface must be clean,dry, firm and smooth.

2.Construction : Use rubber scraper or roll brush to paint, twice or three times ,the coating must be uniform, and shall be free from holiday.

3.Before the coating curing, please protect it well,avoid tread and put heavy or edge things on it.

Usage

1. Pour the liquid material into the container, then stir the powder into it. Keep stirring until it generate the mortar which is no powder block and smooth, and finish in the operating time.

2. Using stick, brush or rubber scraper to brush the mortar onto the base which has been treated evenly. You should brushing two layers or over according to the using environment and performance requirement.

3. In order to avoid the slurry accumulated too thick, you must use scraper to repair the uneven spot.

4.After finish brushing the first layer, you must wait for, when it has a little dry, then you can brush the second layer. If the first layer of brushing time has been over 24 hours, or the coating has been cured, you must use water to humidify the first coating, and then you can brush the second coating on it.

5.Reference Dosage:

Thickness (mm)1.21.52.0
Dosage(Kg/M2)2.0-2.32.6-2.83.2-3.5

Technical Index

ItemIndex
Tensile strength≥1.8
breaking force≥80
Solids content≥65
Impermeability(0.3Mpa, 30min)Impermeability
Surface drying time≤4
Drying time≤8

Package&Storage

—Package:two-component(Powder + Liquid)

—Store at cool dry place. Avoid direct sunshine and freeze.

Packaging Detail:42kg/set ( 17kg liquid +25kg powder) also at your request
Delivery Detail:5days on recepit of your 30%deposit

Related Product for Geerda K11 Elastomeric Roof Waterproof Coating