FST-Brass Thermostatic Shower Mixer(Shower Faucet,Shower Tap) - FST00

Thermostatic Cartridge Description:

Recommended pressure:0.1-5bars

Inlet cold water temperature:8-29°C

Inlet hot water temperature:55-85°C

Outlet water temperature:20-50°C

Safety Stop:38°Care 3 bars

Static Pressure :max 10 bars

Maximum pressure differential :10:1

Cold water supply failure test:

Within 5 seconds of cold water supply failure, outflow rates ≤ 200ml(if the outflow rate ≥ 200ml, outlet temperature ≤42°C), then within 30 seconds, the outflow rate ≤ 300ml.

Outflow temperature auto-aligning sensitivity:

When inlet water temperature is constant and pressure varies by 20%,outer water temperature change will be no more than +2°C

When inlet water temperature is constant, hot water temperature varies from 55°Cto 85°Cand cold water from 8°Cto 29°C, outlet water temperature change will be no more than ±2°C.

Material of thermostatic Cartridge:

1, Body: H59 brass

2, Inlet strainer: Stainless steel

3, Seals: NBR

4, Cartridge Strainer: Stainless steel

Features of Cartridge:

1, Elegant design

2, High quality French “ Vernet ” wax bar

3, Thermostatic contrl

4, Easy cleaning with integral sleeve strainer

5, Easy fixing to the mixer with one screw

6, Pre-set and test thermostatic cartridge

7, Flow control assure by durable ceramic cartridge

Features of thermostatic Mixer

1, Thermostatic control : ensure a stable water temperature.

2, Safety stop(38): unit can set a pre-determined level for avoiding too high temperature.

3, Automatic shut-off: unit automatically shuts off in the event of cold water failure.

4, One control to adjust the temperature.

5, Made from gravity casting brass body, and Pb of brass is 1.2-2%.

6, Water quality strainer can protect impurities.

7, Enjoy EU-standard water-saving device, which is suitable for 0.1 bar to 5 bars.

8, Chrome-plated.

9, The inlet distance between hot water and cold water can be adjusted from 130mm to 170mm.

10, Simple installation and service.

Test:

Every mixer is tested and approved befor sale.

The mixer are subjected to the following tests:

1, Leak-tightness test on flow control.

2, Leak-tightness test of hot and cold water seat.

3, Failure supply safety test.

4, Test temperature of outlet water, when pressure disparity between hot water and cold water is more than 1 bar.

5, Air-tightness at 7 bars.

Package:

For more details, pls feel free to contact us.

Welcome your kind enquiry.