frp sheet - Various sheet specs

Skylite301 frp sheet

Mechanics Features:High steel and high tenacity.

Resin Ingredient:Advanced benzene-----new neopentyl glycol anti-ageing DTM-1 resin.

Fiber Intensity:Non-alkali, non-twist, non-glue glass fiber.

Surface Treatment:Surface applying Morplated anti-ageing glue (80 µm thickness or so) and pastes Melinex 301.

Reinforced Bending Line:Tensile reinforced line with longitudinal uniform distribution (It depends on consumers to choose voluntarily whether adding)

Glass Fiber:Adopting Taian high- quality glass fiber, the content no less than 30%.

Unit Weight:1800g/m² 2400g/m² 3050g/m²

Nominal Thickness:1.2mm 1.5mm 2.0mm

Heat Resistance Limit:-60 to +130

Light Transmittance:75%±2% ( light green) 53%±2% (cream white)

Anti- ultraviolet Rate:99.9%

Tensile Strength:100Mpa

Flexural Strength:180Mpa

Cracking Elongation Rate:1.9%

Barcol Hardness:≥50

Thermal Expansion Coefficient:2.2×10¯5cm/cm/

Thermal Conductivity:0.18w/m° k

Warranty:15 years

The Technical Parameters of FRP Sheet.

• Goodtenacity. No cracking phenomenon when driving nails in roof installation
• Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP sheet is consistent with steel plate.
• Transmittance loss rate is low. No yellowing phenomenon after long term service.
• Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.
• Light through FRP sheet assumes scattering shape and gentle.
• Bright and clean appearance, no distinct air bubble and cracking on FRP sheet.
• Anti- ultraviolet and anti- chemistry corrosion.
• Anti- ageing and anti- pulverization.
• Long service life.