Flexible Tile Adhesive for External Insulation System Shanghai - SA816

flexible,non-slip,water-resistant&frost-resistant,especially suitable for fixing fully vitrified and porcelain tiles,easy to use - details see: https://www.buildingsupplieshub.com/flexible-tile-adhesive-for-external-insulation-system-shanghai-10082868

Place of Origin: Shanghai China (Mainland)	Brand Name: Shunan	Model Number: SA816	Usage: Joint Mortar
Type: Cement Mortar	Quality System Standard: ISO 9001-2008	Material: Cement based

Flexible Tile Adhesive for External Insulation System Shanghai

contact supplier for Flexible Tile Adhesive for External Insulation System Shanghai

Shunan- the pioneer of external thermal insulation composite system vendor in China

Flexible wall tile adhesive for EIFS SA816

A standard setting,flexible, high strength grey cement based adhesive that allows grouting after 24 hours, and full traffic after 48 hours. The adheisve was designed for easy use,allowing a 3 hour pot life

product information

· Weight: 25kg

Color: grey/white

Standard: JG 158-2004

·Shelf life: 6-8 months from production date

·Storage: unopened bag on plate in dry place

Field of Application

1)Used for fixing large size tiles stones and artificial marble

2)Used for fixing coverings on deformable substrate, such as gypsum board, fiber cement board, insulation system etc.

Consumption:

5 ~ 6.5kg/m2

Applicable Place	Applicable Substrate	Applicable tile specification
Interior wall	Cement mortar, clay bricks,concrete,aerated concrete,aerated block	Thickness≤20 mm
	gypsum board, fiber cement board	Thickness≤20 mm
	solid wood board,metal board	≤50 x 50 mm mosaic
	Old tiles	Thickness≤20 mm
Interior floor	Cement mortar, artesian ground floor,concrete	unlimited
	Old tiles	unlimited
	Floor heating	unlimited
	Solid wood board	≤300 x 300 mm(needs interface treating)
Outside wall	Cement mortar,clay bricks,concrete	Thickness≤20 mm
	Old tiles	Thickness≤20 mm
Outside floor	Cement mortar,clay bricks,concrete	uniimited
	Old tiles	unlimited
Special use	Swimming pool	≤300 x 300 mm
	External thermal insulation systems	≤20 kg/m²

Application properties

1) Application temperature: 5°C~35°C

2) Pot life: 3 hours

3) Open time: 20 min

4) Adjust time: 20 min

5) Water addition: 5.75 liter / 25kg( mix ratio with water=0.23 lt : 1 kg )

6) Slip resistance 20kg/m2 no slip

Technical Data

Mix Ratio With Water	25kg / 5.75l
Pot life	3 hours
Open time	20 minutes
Grouting after	24 hours
Full Service	48 hours
Flexibility	Good
Temperature Resistance	-30°C - 100°C
Ageing	Excellent
Resistance to Damp	Excellent
Tensile Adhesive Strength (28 days) ( JG158-2004)	> 1 N/mm²

tools

Rubber hammer,Trowel,Elec-mixer,Bucket

Notched trowel

Substrate requirement

The substrate should be hard, sound, dry, flat, clean and durable

Substrate Preparation

Substrate should be flat ,hard, level, dry, and clean with normal absorption
Clean the surface until free of grease, dust or any stains
Old paint or plaster should be removed
Substrate been repaired should be preserved at least 48 hours

Application Enviroment

Ambient temperature: 5°C~35°C
Avoid application if too hot or freezing weather
Avoid application under direct sunlight and strong wind

Safety

May cause serious damage to eyes
May be sensitive to skin in case of contact.
lrritable for eyes, respiratory system and skin
Keep out of the reach of children
Avoid breathing the dust
In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
Wear suitable protective clothing,gloves and eye/face protection

OEM and ODM projects are welcome

Packaging Detail:Double anti moisture bag,also available on request

Delivery Detail:5 days