FIREPLACE FAN CONTROL THERMOSTAT LTZ-1_FIRE - LTZ-1_FIRE

The thermostat have a ntc sensor and measures the temperature in celsius from the hot room air tube .

The air is comming from the fireplace fan and his power is controled by the thermostat.

Place the heat sensor about 2-3 centimeter before the hot room air tube output , over the fireplace.
So , the measure is more precise , and a sensor chance in the future more easy . On ignition in Auto mode, the fan
power is set to 10% , so the sensor takes a air sample and measures the temperature.

The fan power can be set manually ,or automaticaly from the device through the programmed parameters.

FUNTIONS AND PARAMETERS :

1. THE AIR TEMPERATURE DISPLAY FROM 0 - 255 CELSIUS

2. THE AIR TEMPERATURE FOR AUTO ON DEVICE/FAN

3. THE AIR TEMPERATURE FOR THE MINIMUM FAN POWER

4. THE MINIMUM AIR POWER IN PERCENT %

5. THE AIR TEMPERATURE FOR THE MAXIMUM FAN POWER

6. THE MAXIMUM AIR POWER IN PERCENT %

7. THE AIR TEMPERATURE FOR AUTO OF DEVICE/FAN