Fiberglass Self-adhesive Mesh Tape - HJF-T

Fiberglass Self-adhesive Mesh Tape

Fiberglass self-adhesive mesh tape uses woven fiberglass mesh as base material. After coated with acrylic acid copolymer liquid, it is clean cut into tapes with different width and length. Possessing high stickiness and chemical stability, it is widely used as ideal material for wall crack, plasterboard joints and etc..

Usage

Fiberglass self-adhesive mesh tape is widely used in covering drywall joints, cracks, and holes on drywalls, plasterboard, stucco and other surface.

Specifications

Colors available: White, yellow, grey, silver, blue, black, etc.

Photos:

Direction of Applications:

1. Wall must be clean and dry

2. Center and apply tape over the length of the joint, pressing firmly

3. Apply a generous first coat of compound over the and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.

4. Let dry completely, then sand slightly.

5. Apply sufficient thin finishing coats to produce a smooth wall surface.

6. Cut or butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.

Caution:

1. Failure to completely fill the joint may result in cracking.

2. For best results, use a setting-type compound.