Fiberglass mesh - AR-Fiberglass mesh

The fiberglass alkaline – resistance mesh fabric is based on C-glass woven fabric, and then coated by acrylic acid copolymer liquid, possesses the properties of good alkaline-resistance, high strength, good cohesion,excellent in coating etc. It is widely used in wall reinforcement, out-side wall heat insulation, & roof waterproofing. It can also reinforce cement, plastic,bitumen, plaster, marble, mosaic, etc. It is an ideal engineering material in construction. Fiberglass alkaline resistance

mesh fabric as the basic structure in the heat insulation system, it can prevent cracks because of the good chemical-corrosion resistance and high strength of warp and weft. It can spread the stress equally on different directions, to avoid transfigure in the heat insulation system if it is submitted in a large strength; it is also easy to be applied. It is really the soft steel in the out-side wall heat preservation system. Fiberglass mesh can reinforce and protect stones because of its high strength and balance structure, it can spread the stress equally. In addition, it is easy to be stuck in the back of marble, mosaic and stone. It is an ideal reinforcement for all stone-processing factories.

• Normal Usage : EIFS Reinforcement or cement

reinforcement

• The available sizes for rolls: Width: 1000mm.

----Length: 50m, 100m, 200m, & 300m. Special

----sizes are available too upon your request.

• The date above are typical results and subject to

----change without notice.

• The products should be stored at room

----temperature and kept away from wet and heat

----source.

• The user should test and do trial-application ---

- on theabove product to ensure suitability before

----utilizing it.