Fiber cement board with wood alike surface - Siding plank

Siding plank lap siding offers the traditinal cedar timber pattern and is highly resist to termite and rodent attack.Durablity,flexibility and vreativity are the basic characteristics which Siding plank offers.

Siding plank also specification stable in specification and durable in painting than the wood based siding products.It is nderstandable Siding plank has become extremely popular when a relatively low maintenance free timber planking apperarance is desired.

Component
SIDINGplank® Is manufactured from Portland cements; Lime; Quartz; Cellulose fiber; Additives and water. It does not contain asbestos, brucite, meerschaum, glass fiber and formaldehyde.

The cedar pattern makes the appearance of SIDINGplank® More natural and artistic. SIDINGplank® Is available with factory primed planks. Primed planks provide a superior surface, allowing for a faster and more uniform finish. SIDINGplank® Is also available unprimed. For the selection of coating, we recommend you use the environmentally water-based coating material, such as: Water-based acrylic coating material.

Advantage of Products:
1. Durability. 100% inorganic material, SIDINGplank® Is expected to use as long as concrete resistance against cracking, rotting and delamination.
2. High strength. It can meet the using purpose of exterior cladding.
Light weight. There is no need to take the additional dead load for both partition and ceiling of old buildings into account when it use the panel for refashion, it won't affect its original construction.
3. Non-combustibility. Meeting the standard of GB 8624-2006 and BS 476 PART 4, 6 and 7, incombustibility Grade A1, it is the highest grade of fire incombustible standard, ISO-1182 which is the guarantee of fire proof.
4. Rot resistant, Fungus resistant, Worm resistance.
5. Weather resistant and low maintenance. It can be used in many kinds of building, because it has the capability of anti-chemical corrosive and UV proof, waterproof, exterior wall leak protecting, and good thermal insulation.
6. Dimensionally stable and easy to install. You can make the installation yourself by following the instruction and no need the special training. It is the DIY products, it is easily to get the excellent decoration effect even it is install by the non-professional installation people.

Technical Index Of SIDINGplank®

Specification

7.5*192*3050 mm
Remark: We can offer other width or thickness panels according to the special requirement of customers but its length should be shorter than the above mentioned length.

Physical/ Mechanical Properties:
Density ≥ 1.25 g/cm3
Thermal Conductivity ≤ 0.30W/(m. K)
Water Contain ≤ 10 %
Water Absorption(Natural Color board) ≤ 38 %
Moisture Movement ≤ 0.25 %
Dry Shrinkage ≤ 0.50 %
Water impermeability
After 24 hours testing, it allow wet mark was found on its backside but cannot be found any drip.
Anti-freezing
After 25 time cycled freezing, no laminated and fissure was found
Bending Strength ≥ 14 MPa
Anti-impact
After one strike test, no crack was found on its surface

The Purpose Of SIDINGplank® Lap siding System
1. Weather resistant. Enhances and protects building in all kinds of climates.
2. Reduce internal energy consumption, improve the performance of thermal insulation;
3. Sound insulation, keep private.
4. Fireproofing
5. Attractive natual ceder wood appearance. More natural and nice-looking

Paking: Wood pallet