Expanding foam adhesive - SA802

hydraulic mortar 1)High adherence, 2)Waterproof, 3)Water vapour permeable, 4)Easy to apply, 5)Not combustible - details see: https://www.buildingsupplieshub.com/expanding-foam-adhesive-10082900
Place of Origin: Shanghai China (Mainland)Brand Name: ShunanModel Number: SA802Usage: Joint Mortar,Building Coating
Type: Cement MortarMain raw material: Cements and additives , SandState: Powder Coating 
Expanding foam adhesive
contact supplier for Expanding foam adhesive


General description

Polystyrene board adhesive used as an adhesive and cover on expanded polystyrene boards

PRODUCT INFORMATION

PRODUCT PACKAGING

Weight: 25kg

Color: grey

Consumption: 4.5~5kg/m2

Shelf life and storage: 6 months after manufacturing date in dry ventilated place

Standard: JG149-2003

Water addition: 0.22 L of water for 1 kg basecoat, 5.5 L of water for 25 kg basecoat mortar

Colors

Grey

Field of application:

The function of this product is to protect the EPS board and fix the mesh. The finishing coat can be paint,render,plaster etc...

Consumption

4.5~5kg/m2

Product specification

Tools

electric-mixer,trowel,bucket

Substrate requirement

  • EPS board must be clean (no dust or dirt)
  • EPS board must be fixed stably (Wait min 24h before applying shunan.therm epsad)
  • The surface of the whole EPS wall must be level
preparation
1) EPS board must be fixed stably

2)Polish the EPS board to make sure the whole EPS wall is flat

Instructions for use

  • Add water and mix until a homogeneous paste is obtained. Then, use a notched trowel to apply the mixture on an expanded polystyrene board. Alternatively, place a few (6 to 9) blobs of mixture around the perimeter and in the center of the board.
  • When all insulating boards have been fixed then apply a layer of Shunan with a 6mm notched trowel and press the glass fiber mesh against it (at least 10cm of overlapping between meshes). Cover the mesh and smooth the application with the excess mortar protruding when pressing the mesh.
  • Allow the base layer to dry.

Remarks:

  • Only mix with water, no other addition
  • The temperature of air and glue must be from 5°C~35°C
  • The glue must be used up in 3h
  • Avoid sunshine, high temperature and freezing
  • Avoid strong wind during application
  • Avoid rain during application

Application enviroment

  • Temperature:5°C~35°C
  • Avoid raining, high temperature and frost
  • Avoid direct sunlight and class 5 wind
Safety
1)May cause serious damage to eyes
2)May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin
3)Keep out of the reach of children
4)Avoid breathing the dust
5)In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
6)Wear suitable protective clothing,gloves and eye/face protection

Shunan EPS System is a lightweight, low density system employing expanded polystyrene insulation with adhesive and mechanical dowel fixings

SA802 is a part of External Wall Insulation systems of external building walls- with rendering

Typical ETIC System Configuration

1. Concrete or Masonry Substrate

2. Adhesive Applied to Insulation Board

3. Insulation Board

4. Base coat (SA802)

5. Fibreglass Mesh (SA802)

6. Base coat

7. Flexible Exterior Wall Putty

8. Finish Coat

The main character of external thermal insulation system of thin plastering based on EPS board:

1.Appliable to all kinds of interior/exterior wall thermal insulation

2.Remarkable thermal insulation effect,applies to any areas

3.Good workability,short cycle,mature process

4.Stable raw materials performance,no second pollution during construction

5.The mature external thermal insulation system widest used all over the world

Packaging Detail:In 25 kg plastic-lined paper bags
Delivery Detail:5 days

Related Product for Expanding foam adhesive