Escalator - escalator

ZOYOescalator have been designed,manufactured and installated strictly according to European standards EN115.Silence and comfort - details see: https://www.buildingsupplieshub.com/escalator-10061126

Type: Escalators	Place of Origin: Jiangsu China (Mainland)	Brand Name: ZOYO or AUTUR	Model Number: escalator
Indoor escalator: escalator

ZOYO escalator have been designed,manufactured and installated strictly according to

European standards EN115.

Silence and comfort. The new gene-ration has inherited the traditional safety, reliability,

high efficiency style and combined with updated market trends as well as tailored solutions.

It is widely used for shopping malls, Hotels, office blocks and etc.

ZOYO Escalator

Type	ZOYO(Commercial)
Inclination	30° /35°
Step width(mm)	600/800/1000
Horizontal step length (mm)	800/1200 or By your Requirement
Speed (m/s)	0.5
Capacity (p/h)	4500/6750/9000 for step width 600,800,1000mm
Power supply	AC 3 phase. 50Hz.60Hz or by your requirement
Lighting supply	AC single phase. 50Hz/60Hz or by your requirement
Balustrade design	Vertical safety glass (10mm safety tempered glass) or by your requirement
Balustrade profile	Hairline ST/STor by your requirement
Handrail	Black, or by Your Requirement
Deckings	Hairline ST/ST or by your requirement
Skirting panel	Hairline ST/ST, Optional Steel with Teflon coating
Step	Die casting aluminum, painted with silver gray. ST/ST
Landing plate	Etched ST/ST with anti slip pattern
Operation panel	Red emergency stop button and up/down key switch

Type	FSLH(Heavy duty)
Inclination	30° / 35°
Step width(mm)	800/1000
Horizontal step length (mm)	1200/1600 or by your requirement
Speed (m/s)	0.5
Capacity (p/h)	6750/9000 for step width 800,1000mm
Power supply	AC 3 phase. 50Hz/60Hz
Lighting supply	AC single phase. 50Hz/60Hz
Balustrade design	Vertical safety glass(10mm safety tempered glass) or Inclined ST/ST(2mm)
Balustrade profile	Hairline ST/ST
Handrail	Black or By your requirement
Deckings	Hairline ST/ST
Skirting panel	Hairline ST/ST
Step	Die casting aluminum, painted with silver gray. ST/ST
Landing plate	Etched ST/ST with anti slip pattern /Aluminum with anti-slip grooves
Operation panel	Red emergency stop button and up-down key switch

Safety features(Standard)

Static Contact
Eliminate static electricity created from running of the steps(pallets).

Main Drive-Chain Contact
When the Dive-Chain is broken or elongate,the escalator will be protected.

Skirting Contacts
These contacts have been installed at both the top and bottom of the escalator at the transition curve. If an object gets caught between the step and the skirting panel, the resultant pressure on the skirting panel will actuate one of these contacts, thereby disabling and switching off the escalator.

Handrail Inlet Contacts
The handrail inlet contacts are located far beneath the head of the balustrade. The handrail entry contacts are so positioned that if there is any danger of an object becoming wedged in the handrail inlet points, a contact will actuate and switch off the escalator.

Automatic Lubrication System
A central automatic lubrication system complete with a pump and proportioner can be installed to provided adequate lubrication for all chains automatically.

Step chains broken contacts
Located in the lower step-return truss, these contacts monitor the step chains for elongation, breakage or shortening of one or both of the step chains. When actuated, the monitoring contacts will disable and stop the escalator's further movement.

Step Sag contacts
Fixed at the start sections of both inclined upper and lower transition curves, it will be actuated to stop escalator in case step (including step roller) sags more than 3mm or step broken.

Phase Monitor
This is a safety feature, which monitors the main power supply's phase.In the event of phase failure or phase reversal.The escalator will be stop.

Motor Overload & Overheat (Relay)
This relay monitors the motor working condition. In case of motor over loaded or overheated is over 120%, the escalator should be stopped.

Comb Contacts
If a foreign object is trapped between the comb and the steps, the resulting pressing action will move comb plates backwards and actuate the safety contacts, thereby switching off the escalator.