EPS MINERAL COATING PLASTER

CMC EPS MINERAL COATING PLASTER

DESCRIPTION:CMC EPS MINERAL COATING PLASTER IS PRODUCED AS A COATING PLASTER OF EXTERNAL SIDE ON EPS, WHICH IS MADE UP OF SOME MATERIALS (SUCH AS ACRYLIC, CALCITE, SILICA AND WATER) PREPARED AT SPECIAL RATE OF MIXTURE SPECIFIED BY OUR FIRM.

APPLICATION FIELD:IT IS APPLIED BY USING PLASTER MACHINES TESTED AND CERTIFIED AS CORRECT IN FACTORY FIELDS, ON EPS MATERIALS (AT 26-30 DENSITY OR MORE AND CLASS B1 NONFLAMMABLE) FORMED AS DÉCOR PROFILES AND POLYSTYRENE PLATES OF WHICH HEAT ISOLATION VALUE IS VERY HIGH (10.033-10.035-10.040). CMC EPS MINERAL COATING PLASTER WITH COATED EPS MATERIAL BECOMES READY FOR APPLICATION ON EXTERNAL SIDES OF BUILDINGS AFTER HAVING ENOUGH TIME IN ORDER FOR CMC EPS MINERAL COATING PLASTER TO DRY AT NATURAL WEATHER CONDITIONS.

ATTENTION:CMC EPS MINERAL COATING PLASTER SHOULD BE APPLIED HOMOGENEOUSLY AT MINIMUM 3 (THREE) MM. AND MAXIMUM 5 (FIVE) MM. THICKNESS ON APPLICATION SURFACE OF EPS.

APPLICATION METHOD: BEFORE COATING ON EPS MATERIALS IN FACTORY FIELD, CMC EPS MINERAL COATING PLASTER WHICH YOU BOUGHT IN BLUE PLASTIC DRUMS OF 200 KG CAPACITY SHOULD BE MIXED CONTINUOUSLY (WITHOUT INTERRUPTING) MINIMUM 30 MINUTES BY USING MANUAL PLASTER MIXING MACHINES WITH ELECTRIC-MOTOR CIRCULATED AND THEN IT WILL BE READY TO USE. IN ORDER TO HAVE THE BEST RESULT OF CMC EPS COATING PLASTER, SUCH PROCEDURE OF MIXTURE SHOULD BE REPEATED BEFORE USING OF BLUE PLASTIC DRUMS OF 200 KG CAPACITY.

STORING CONDITIONS:OPENINGS OF DRUMS IN WHICH CMC EPS COATING PLASTER IS CONTAINED SHOULD ALWAYS BE AIRTIGHT CLOSED AT ROOM TEMPERATURE.

ATTENTION:IT IS COMPULSORY THAT THE PROVISIONS STATED IN THIS TECHNICAL SPECIFICATION BE EXECUTED COMPLETELY AND AT EVERY TIME IN ORDER TO HAVE THE BEST PERFORMANCE OF CMC EPS COATING PLASTER OTHERWISE DEFICIENCIES AND FAULTINESS IN CMC EPS COATING PLASTER SHALL BE EXEMPTED FROM THE GUARANTEE PROVIDED BY OUR FIRM