Ellis Folding Canopy Shade With 220v Motor

1.There are an automatic lead rail on each side for the Ellis canopy shade. The number of the motor driver is altered by the size of the area.

2.Usually we use one, two or four 220V Elixs motors. The automatic lead rail adopts crawler-type transmission.

3.The motors keep the same speed, as well as the track running speed, so that we can make sure the shade is opening or closing at the same time.

4.With good flexibility, the connect bar between the fabrics supports the fabrics and makes sure that the fabric will not fall.

5.

After unfolding the canopy, the fabrics will appear well- proportioned flat or wavy effect. The system can be designed to be either one-side opening or two-side mode.

1.The Max. size of single canopy shade is 12M and the widest 3M. Every 50cm there is a transverse connecting rod, which can be made to be flat or arc canopy shade.

2.The biggest driving area of double-motor or 4 motors respectively is 18 square meters and 30 square meters. Arc canopy shade driving area will be less, usually it’s only 70% of standard size.

3.There is no tensile strength requirement for fabrics, so you can choose ordinary euphotic, diaphanous,light proof roller shutter fabric.

4.According to different occasions, you can choose manual switch control, infrared remote control, wireless remote control and intelligent control.Both single control and group control are available.