Elevator Overload Measurement System - UC-P

elevator overload unit, a.Zero load,heavy load,overload, b.Range, 0~5T, c.Housing:Alloy steel, d.Protect:IP65 - details see: https://www.buildingsupplieshub.com/elevator-overload-measurement-system-10060710

Type: Elevator Parts	Place of Origin: Zhejiang China (Mainland)	Brand Name: ANT	Model Number: UC-P
Name: Elevator weighing load cell	Installation: Steel rope, roper teminal, car frame, under cabin etc	Capacity: 0~5000kg	Construction: Alloy steel
Alarm Relays: Light load, heavy load, overload	Supply Voltage: AC/DC14V~65V	Rated output: 2.0±0.02% mV/V	Total error: ±0.5%F.S
Repeatability: ±0.1%F.S	Creep(30min): ±0.05%F.S/30min

Elevator Overload Measurement System

elevator overload unit

About us

As a branch of Ningbo UTING Electronic Co., Ltd, ANT Electronic Co., Ltd is a manufacturer specialized in the production of elevator load cell /weighing device, crane load cell, elevator door detector/light curtains, phase relays, photoelectric sensors and other elevator sensors. The company is located in Yongfeng Industry Zone, Jichang Road, Ningbo City.

It produces Elevator load weighing device load cell /weighing device for steel ropes, rope terminals, car frames, and under cabins etc.

The rope elevator load cell /weighing device fixed with the steel ropes of the elevators. elevator load cell /weighing device fixed with each rope or fixed with all of ropes. Such elevator load cell /weighing device detect the rope tension and output signals of the load. The rope terminal elevator load cell /weighing device are fixed between two plates of the rope terminal and detect the deformation of the plates. The car frame elevator load cell /weighing device are fixed on the car frame and detect the deformation of the frame caused by the elevator load. The under cabin elevator load cell /weighing device are fixed under cabin and between cabin bottom and cabin frames and take the elevator load.

Load cells for steel cables, rope terminal plates, under cabin, cross beams etc

We accept customized load cells.

Technical parameters

Elevator load weighing device load cell

Signal output of zero load, heavy load and overload

2 measuring channels

Easy calibration with no need of foreknowing weight

User-defined overload factor

Automatic learning function of floor accurate compensation

Elevator load weighing device load cell

Technical parameter
Capacity	0~5000kg	Input resistance	760/1060±10Ω
Rated output	2.0±0.02% mV/V	Output resistance	700/1000±2Ω
Total error	±0.5%F.S	Insulation impedance	≥5000MΩ
Repeatability	±0.1%F.S	Safe overload	150%F.S
Creep(30min)	±0.05%F.S/30min	Ultimate overload	200%F.S
Zero balance	±1%F.S	Construction	Alloy steel
TC SPAN	±0.02%F.S/10°C	Protection class	IP67/IP68
Operating Temp.	(-30~+70)°C	Citation	GB/T7551-1997/ OIML R60