Electronic Thermostat,HVAC Room Thermostat,Heat Room Thermostat - Roomstat 16Amp

Room Thermostats for Electric Underfloor Heating,Underfloor Heating Room Thermostat

Introduction:

The Roomstat is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat.The thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

Application:

For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings.

Features:

LED indicator is light when heating is on
With manual switch and knob for easy operation
On/off control output for heating device
Setback function when connecting with a programmable timer

Temperature limitation function for protecting the floor

TECHNICAL DATA:

Voltage: AC230V (AC110V / AC24V available)
Power consumption: 5W
Setting range: 4°C~45°C
Limitation scale: 25°C~50°C

Setback temperature: 5°C

Switching differential: ±0.5K
Ambient temperature: -5°C~50°C
Protective housing: IP20
Housing material: self-extinguishing PC
Floor sensor: rubber-thermoplastic NTC sensor,

Dimensions (H/W/D) 80/80/50 mm
cable length is 3m