electric ignition sawdust pellet cast iron fireplace - HP20I

Electric ignition sawdust pellet cast iron fireplace

INTRODUCTION:

(1) Infrared remote control, time setting.

(2) Boot automatic ignition device, without manual add fuel, clean fast and no pollution.

(3) Automatic feeding air and distribution system, without manual control, can achieve the best effect of combustion.

(4) Closed combustion, good view, all with outdoor air combustion, flue gas discharge pipe for special purpose, to prevent the waste gas into the interior.

(5) Intelligent temperature control 4 gear, set temperature greater than 5°C, maximize the fireplace heating at full speed; Set the temperature difference is less than 2-4°C, medium-speed burning fireplace; Set the temperature difference is equal to 0 and

1°C, dead slow burning fireplace; Setting temperature is greater than the set temperature, the fireplace is

not stall minimize keep burning flame.

(6) Fireplace fault flameout, the automatic shutdown.

(7) The fuel in the fuel consumption, automatic shutdown.

(8) Three gear interior circulation fan, free to adjust the air output.

(9) Automatic slag discharge device (patent technology), combustion chamber below the ash removal device, the ash removal

device with automatic control system, can set soot cleaning time, 10-120 minutes set, set the length of time a node, every 10

minutes to 120 minutes as a cycle.

(10) Manual force grey button, can adjust the position of the ash removal device, at any time convenient to put the combustion

chamber and manual removal.

(11) Double-layer heat exchange, improve the efficiency of 30%.

(12) Equipped with electric leakage protection devices, the leakage condition and automatic power off.

(13) Held in automatic feeder, when stuck phenomenon in a feeder, automatic fire control system to eliminate fault feeder

jammed.

(14) Made of special heat soot cleaning device, soot is convenient, to improve the efficiency of heat exchange.

(15) Using high-grade refractory glass, 800 water not burst.

(16) Furnace surface using high temperature anti-corrosion paint, high temperature 1200 don't fall off.

(17) Furnace surface decorative paint, using thermal spraying technology, elegant and beautiful and easy.