Gate Motors

RCT slide 500 - DT500KT

Price: R2,813.22

Anti Theft: SA102
Rack: SA127 - 4M
Transformer: - SAO49
Transmitter: TM001
Receiver: Onboard

TECHNICAL:

Maximum Gate Mass: 500kg
Maximum Gate Size: 11m
Collision Sensing: Electronic
Duty Cycle: 50%
Motor Voltage: 12 Volt
Motor Power: 120 watt
Opening Time: 18m/min
Supply Voltage at Gate: 16V AC or 220V

FEATURES:

Party mode
Lockable lid
PIRAC Mode
Soft start/stop
Multi-user mode
Built-in Spirit Level
On-board Receiver - 30 Tx
Advanced settings
Gate status indicator
Safety beams facility
Electronic anti-crush
Autoclose (5 - 75 sec)
Solid steel pinion gear
Ant proof PCB housing
Troubleshooting LEDs
Vehicle exit loop facility
One touch programming
Motor height adjustment
Pedestrian opening facility
Pluggable AUX connections
Solid steel internal drive gear
Pillar light switching (optional)
Lid anti-tamper switch (optional)
Gate tamper alarm output (optional)

FEATURES EXPLAINED:

Party mode: Functional only when Autoclose is activated. It allows for the temporary overriding of Autoclose via an external trigger. Used forfunctions or to allow free access of caravans; furniture removal trucks etc.

Lockable lid: Lid is locked in place and requires a key to remove.
PIRAC Mode: Allows for the immediate closure of the gate after passing through the safety beams. This prevents the unnecessary opening of
large gates to the fully open position.
Soft start/stop: This feature reduces wear and tear on the motor gearbox.
Multi-user mode: Prevents the gate from receiving a trigger to close while it is opening. Autoclose must be activated to allow multi-user mode
to be used. This will prevent accidental closure on a vehicle or pedestrian.
Built-in Spirit Level: To aid in optimal positioning of the motor during the installation process.
On-board Receiver: Built into the main electronic circuit board. It is compatible with many makes of code hopping remotes.
Advanced settings: Ramp down distance; torque and current setting have three different settings for the optimal setting of the motor dependent
on site requirements.
Gate status indicator: Indicates when the gate is open, closed or moving as well as if there is a power failure.
Safety beams facility: Safety beams can be input to prevent the accidental closure of the gate on a car or pedestrian.
Electronic anti-crush: Senses when the gate has hit an obstruction. This over current sensing will result in auto opening if the obstruction is in
the closing cycle or if in the opening cycle the gate will stop.
Autoclose (5 - 75 sec): The motor can be programmed to automatically close the gate from 5 - 75 sec after opening.
Solid steel pinion gear: More robust than plastic gear and will not break.
Ant proof PCB housing: Reduces the possibility of ant infestation of the electronic circuit board.
Troubleshooting LEDs: LED activity will assist in fault finding.
Vehicle exit loop facility: Vehicle detector can be input to allow for the automatic opening of the gate when a vehicle drives over the ground
loop.
One touch programming: Simple one-touch process to program the motor after installation is completed.
Motor height adjustment: Motor height can be adjusted, irrespective of how the foundation plate has been installed, to achieve optimal meshing
of the gear with the rack.
Pedestrian opening facility: An external trigger via a second receiver, intercom or keypad can be used for the partial opening of the gate for pe-
destrian access.
Pluggable AUX connections: For easy maintenance of circuit board. No messy loose wires needing to be re-wired, simply unplug connectors
and replace when ready.
Solid steel internal drive gear: More robust than plastic gear and will not break.
Pillar light switching (optional): A facility to switch on pillar lights when the gate is activated. The lights remain on for 4 minutes and will au-
tomatically switch off.
Lid anti-tamper switch (optional): A tamper switch can be linked to house alarm or siren to trigger if the motor is opened illegally.
Gate tamper alarm output (optional): A facility to link the motor to the house alarm or siren. It will trigger if the gate is forced open.