Dry fix tape - waterproof materials

Release film: PE, PET, kraft paper, Surface: HDPE, AL, GREY finish, Terra cotta, polyester - details see: https://www.buildingsupplieshub.com/dry-fix-tape-10100485

Type: Waterproof Membrane	Place of Origin: Shandong China (Mainland)	Brand Name: Boguan	Model Number: waterproof materials
Thickness: 1mm - 5mm	Elongation: 450%	Width: 50mm to 1m	Length: 1m to 50m

Our company adopt the German technology, and the most advanced international formulations which is suitable for the manufacture of light steel structure waterproof anti-corrosion materials. This kind of membrane has the following characteristics, low cost, 1-2 times higher than the life of the steel structure itself, environmental materials to fill gaps in the domestic steel structure waterproofing.

Product description:

The product is a kind of polymer modified asphalt materials, using polyester carpet or glass mat for the matrix. The surface is covered with polyethylene film, aluminum foil or fine sand, meanwhile, the base is covered with a release sheet. The product has a good self-adhesive and bending properties.

Application:

Construction is simple & clean and can be widely used in roofing, basement, bathroom, etc. For construction, it can be paved or sticked on pipe wall(except heat pipes), bridges and other complex environment. But it is prohibited to work in open flame or convert fire.

The detailed info.:

thickness:1mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3mm, 4mm.

reinforcement: polyester, fiberglass

width:1m or any width within 1m.

length:2.5m, 5m, 10m, 15m, 20m.

This product has the low-temperature resistance property. And it can be used in the metro, tunnels, fire scene. The property of moisture resistance and sealing materials makes it can be applied to pipeline waterproof & anti-corrosion works.

The product meets the industry standard JC 840-1999 “self-adhesive plastic bitumen waterproofing membrane”. The main physical properties are listed as follows,

[Physical property]

Thickness/mm	Width/m	Area/m2
1.2	1	20
1.5	1	20
2.0	1	15

NO.	Property	Unit	surface material
			PE	AL	N
1	Water impermeability	Pressure, M Pa≥	0.2	0.2	0.1
1	Water impermeability	Retention time, min≥	120, water impermeable
2	Heat resistance°C		---	80 No slippage, flowing, dropping.
3	Tensile force N/50mm≥		130	200
4	Elongation at break,%≥		450	200	450
5	Softness		-20°C, Φ20mm, 3s, 180°C, no crack.		---
	Shear performance N/mm	Between membranes≥	2.0 or fracture on the external agglutination section		fracture on the external agglutination section
	Shear performance N/mm	Between membrane & aluminum plate≥	2.0 or fracture on the external agglutination section		fracture on the external agglutination section
	Peel strength, N/mm≥		1.5 or fracture on the external agglutination section		Fracture on the external agglutination section
	Puncture resistance			water impermeable
	Aging by artificial climate	Appearance		No crack, no bubble.	---
		Tensile force retention percentage, %		80	---
		Softness at low temperature,°C		-10°C, Φ20mm, 3s, 180°C, no crack.	---