customized product BY pvc warp kintting liner (supplier) - JRY033

1.Geomembrane Width:1~8m, 2.Geomembrane Thickness:0.5mm~3.0mm, 3.Type:smoothed geomembrane,textured geomembrane - details see: https://www.buildingsupplieshub.com/customized-product-by-pvc-warp-kintting-liner-supplier-10057978

Type: Geomembranes	Place of Origin: Shandong China (Mainland)	Brand Name: JRY	Model Number: JRY033
Material: HDPE,LDPE,LLDPE,PVC,EVA	JRY--color: black, white	JRY--thickness: D5199,0.75mm,1.00mm,1.25mm	JRY--width: 2.5-8mm
JRY--tensile strength: ≥14,≥17,≥18,≥25	JRY--tar resistance: D1004,187N,249N,311N,374N	JRY--puncture resistance: D4833,480N,640N,800N,960N	JRY--stress crack resistance: D5397,300hr
JRY--carbon black content: 2.0%	JRY--oxidative induction time: 100min	JRY--elongation at break: 400%,500%

customized product BY pvc warp kintting liner (supplier)

contact supplier for customized product BY pvc warp kintting liner (supplier)

Specifications:

Thickness: 0.5 to 3.0mm

Width: 2 to 7m

Type: smoothed geomembrane, textured geomembrane

Materials: polyethylene (HDPE, LLDPE),

Features:

Low permeability

HDPE lining systems are secure because leachate does not penetrate them

Methane gas will not escape from the HDPE cover system

Rainwater will not infiltrate an HDPE cap

Chemical resistance

HDPE, resistant to a wide range of chemicals, is not threatened by typical solid or hazardous waste leachates

Suitable for sludge and secondary containment around chemical storage facilitiesUltraviolet resistance

HDPE's resistance to UV exposure is further enhanced by the addition of carbon blackAdditionally, with the absence of plasticizers, volatilization is not a problem

Reflective factor

Geotec offers its HDPE geomembranes in white and black

A white surface helps mitigate liner temperature extremes and aids visual inspection

HDPE Geomembrane Technical Parameters(ASTM Standard)

Properties	Test method	GM SH075	GM SH100	GM SH125
Thickness	D5199	0.75mm	1.00mm	1.25mm
Density	D1505	0.940g/cc	0.940g/cc	0.940g/cc
Tensile properties Yield strength Breaks strength Yield elongation Break elongation	D6693 Type IV	11KN/m 20KN/m 12% 700%	15KN/m 27KN/m 12% 700%	18KN/m 33KN/m 12% 700%
Tear resistance	D1004	93N	152N	156N
Puncture resistance	D4833	240N	320N	400N
Stress crack resistance	D5397(App.)	300hr	300hr	300hr
Carbon black content	D1603	2.0%	2.0%	2.0%
Oxidative induction time (OIT)	D3895	100 min	100min	100min

Properties	Test method	GM SH150	GM SH200	GM SH250	GM SH300
Thickness	D5199	1.50mm	2.00mm	2.50mm	3.00mm
Density	D1505	0.940g/cc	0.940g/cc	0.940g/cc	0.940g/cc
Tensile properties 1. Yield strength 2. Breaks strength 3. Yield elongation 4. Break elongation	D6693 Type IV	22KN/m 40KN/m 12% 700%	29KN/m 53KN/m 12% 700%	37KN/m 67KN/m 12% 700%	44 KN/m 80 KN/m 12% 700%
Tear resistance	D1004	187N	249N	311N	374N
Puncture resistance	D4833	480N	640N	800N	960N
Stress crack resistance	D5397(App.)	300hr	300hr	300hr	300hr
Carbon black content	D1603	2.0%	2.0%	2.0%	2.0%
Oxidative induction time (OIT)	D3895	100 min	100min	100min	100min

Spec Item	LDPE geomembrane	HDPE geomembrane
		normal type		environment friendly
Tensile strength(Mpa)	≥14	≥17		≥25
Elongation at break(%)	≥400	≥400		≥550
Right angle tearing strength(N/mm)	≥50	≥80		≥110
Carbon black content	≥2%	≥2%		≥2%
Density (g/cc)	0.940	0.940		0.940
Permeability coefficient of vapor (g·cm/cm2·s·pa)	≤1.0x	≤1.0x		≤1.0x
Scope of application temperature	+70°C~-70°C	+70°C~-70°C		+70°C~-70°C
Environmental stress resistant cracking performance ( )			≥1500
Oxidation induction time at 200°C (minute)			≥20
Thickness (mm)	0.3~2.5
Width (m)	2~7

HDPE geomembrane

1. Type: pointed surface 2. good tensible strength 3. excellent waterproof 4. antiaging

Application1. Prevent leakage disposal in waste burying field or waste water or waste dregs disposing field.

2. River bank,lake dam,mine remainings,reservior,tunnel,liquid storage pool(pit,mine)

3. Preventing leakage in roaded and other groundsill.

4. The plane direction laying of dam,the vertical direction laying for groundsill,used in the construction fence and waste material field.

5. Used in seawater or freshwater feed field.

6. Used in groundsill of road,highway,railway and waterproof layer of swelling clay and wet collapsed loess.

7. Preventing leakage on rooftop.

Number	Item	Value
		GL			GH
		GL-1	GL-2		GH-1		GH-2
1	Tensile strength (Map)	≥14			≥17		≥25
2	Elongation(%)	≥400			≥450		≥550
3	Right angle tear strength N/mm	≥50			≥80		≥110
4	Carbon black content of a %	≥2
5	Environmental stress cracking F20/h	----		----		----		≥1500
6	Oxidation induction time at 200 °C/min	----		----		----		≥20
7	Water vapor permeability g.cm/(cm2 .s.Pa)	≤1.0×10(-16)
8	-70°CEmbrittlement of low-temperature impact	(Passed)
9	Dimensional Stability (%)	±3

0.2mm-4.0mm HDPE sheet Geomembrane( ASTM standard)

geomembrane, 0.5mm,0.75mm,1mm,1.5mm,2.0mm,2.5mm,3.0mm,3.5mm,4.0mm smooth and textured,HDPE ,LLDPE

geomembrane Introduction

Our geomembrane is manufactured from High Density Polyethylene resins. The surfaces of both sides are smooth. The products are manufactured by the technology of coextrusion-blown triple layer. It provides geomembranes with specific properties on each layer, e.g. bicolor and/or textured designs.

Performance

Excellent physical and mechanical performance, high tearing resistance, good deformation adaptability, high puncture resistance, high aging resistance, high UV resistance, anti-acid & alkali, excellent low & high temperature resistance, innocuous, long life span, perfect water proof performance, seepage and humidity resistance.

Application

The projects of Landfill site, bank, dam, storage reservoir, channel, irrigation, highway, railway, tunnel, drinking tank, salt field bittern pan, chemical liquid storage, treatment tank, artificial lake and riverway etc.

Packaging Detail:40ft container can load about 300000 of 80g/m2 if the roll width is 3m,4m,6m and roll length is 100m. PP woven geotextile or PE film for outer package.

Delivery Detail:within 7days after receiving the deposit.