CPVC FITTINGS - CPVC Fittings

Kawsar CPVC is PVC (polyvinyl chloride) that has been chlorinated via a free radical chlorination reaction. This reaction is typically initiated by application of thermal or UV energy utilizing various approaches. In the process, chlorine gas is decomposed into free radical chlorine which is then reacted with PVC in a post-production step, essentially replacing a portion of the hydrogen in the PVC with chlorine.

Depending on the method, a varying amount of chlorine is introduced into the polymer allowing for a measured way to fine tune the final properties. The chlorine content may vary from manufacturer to manufacturer; the base can be as low as PVC 56.7% to as high as 74% by mass, although most commercial resins have chlorine content from 63% to 69%.[citation needed] As the chlorine content in CPVC is increased, its glass transition temperature (T_g) increases significantly. Under normal operating conditions, CPVC becomes unstable at 70% mass of chlorine.

Various additives are also introduced into the resin in order to make the material processable. These additives may consist of stabilizers, impact modifiers, pigments and lubricants.

CPVC shares most of the features and properties of PVC. It is also readily workable, including machining, welding, and forming. Because of its excellent corrosion resistance at elevated temperatures, CPVC is ideally suited for self-supporting constructions where temperatures up to 200 °F (90 °C) are present. The ability to bend, shape, and weld CPVC enables its use in a wide variety of processes and applications. It exhibits fire-retardant properties.

Comparison to polyvinyl chloride (PVC)

Chemical resistance

Heat resistance

CPVC can withstand corrosive water at temperatures greater than PVC, typically 40°C to 50°C (104°F to 122°F) or higher, contributing to its popularity as a material for water piping systems in residential as well as commercial construction.

Mechanical properties

The principal mechanical difference between CPVC and PVC is that CPVC is significantly more ductile, allowing greater flexure and crush resistance. Additionally, the mechanical strength of CPVC makes it a viable candidate to replace many types of metal pipe in conditions where metal's susceptibility to corrosion limits its use.

Best Regards,

Habib-Ur-Rehman

Director,

Kawsar Engineering (Pvt) Ltd. Manufacturing uPVC Pipes and Hand Pumps.

Tel: +92-915830010

+92-915812723

Fax: +92-925818116

M.P: +92-3219090218

Website:kawsar-engineering.com