Corner Bead With Fiberglass Mesh (factory) - HSwm-2096

Angle Bead, 1,Material-Hot Galvanized steel, 2,Thickness-0.3,0.35mm, 3,Size-30*30mm, 45*45mm, 50*50mm, 4,length-2m~3m... - details see: https://www.buildingsupplieshub.com/corner-bead-with-fiberglass-mesh-factory-10043995

Place of Origin: Hebei China (Mainland)	Brand Name: Honsen	Model Number: HSwm-2096	Material: Galvanized iron,Stainless steel wire,PVC coated wire
Width:: 25mm x 25mm	Length: 2m - 2.5m	Mesh Width: 100mm x 100mm

Corner Bead With Fiberglass Mesh (factory)

Expanded Corner Bead (factory)

Corner Bead With Fiberglass Mesh

Expanded Corner Beadhave a smooth round nose bead with Diamond Mesh wings for the keying of plaster right up to the nose of the bead.On the outside is the finished edge which is where one side of your drywall knife runs on when you are applying drywall mud. The two flanges sit flat on your raw drywall. The diamond decoration along the length of the flange act as a keyway for holding the drywall mud to the drywall and the corner. This mesh insures a perfect bond and provides effective reinforcement where most needed. Especially recommended in fireproofing columns and beams. Straight edge nose is easy to install and permits plumb straight outside corners. Excellent protection for corridor corners exposed to traffic.

The expanded mesh wings are easily flexed to adapt to framing irregularities and to match appropriate screed heights. Furnished in galvanized steel, aluminium,stainless steel,and zinc (99% pure zinc) alloy.

The Picture shows the

Corner bead with creased Reinforce Flange

Providing straight corners with wave margin and nail hole. Used over irregular surfaces. Plaster keys near nose for reinforcement where needed most