Commerrcial type iron remote door closer - DCE-2001

Specification

Name: remote door closer

Model: DCE-2001

Material: Iron,Cast Iron

Finish: Sprayed Bronze

Door width:800-1000

Door weight(KG):45-65

Function:Two value speed hold open

Introduction

The model DCE-2001 Series is Stanley’s most versatile Door Closer. The reduced body profile provides ease of installation on light duty applications. In addition the R-14 Silicon Aluminum construction provides dependable performance under heavy loads associated with high use institutional applications. The DCE-2001 Closer accommodates a variety of standard and heavy-duty arm applications.

Features

Fully Hydraulic Checking

Controls the door through the entire opening and closing cycles by providing adjustable backcheck upon opening and adjusting general and latch speeds through the closing cycle.

(1) opening swing, no checking

(2) backcheck

(3) general speed

(4) latch speed

The DCE-2001Series Door Closers are equiped with a seperate hydraulic valve adjustment to delay the closing speed from 180 to 70 degrees of door opening range.

Non-Handed

Can be used on both RH and LH doors for both push side and pull side mounting.

Adjustable Spring Power

The DCE-2001 Series Door Closers are adjustable from size 2 through 6 with 15% adjustment over size 6. The DCE-2001 Series Door Closers are adjustable from size 1 through 4. The DCE-2001 Series Door Closers are designed to meet entrance accessibility requirements of 5 LBF opening force or less.

Non-Critical Regulation

The separate adjustments for backcheck, general and latch speeds are equipped with non-critical “V-Slot” regulating valves which allow for fine tuning the closing and latching speeds as well as the backcheck intensity.

All Season Fluid

All season fluid eliminates the need for seasonal adjustment.

Special High Silicon Aluminum Alloy Housing

All DCE-2001 Series Door Closers are constructed of RYOBI’S R14 HIGH SILICON ALUMINUM ALLOY to exceed the ANSI/BHMA A156.4 Grade 1 requirements.

Maintenance Free

Door Closers mounted in accordance with the provided installation instructions are maintenance free from periodic inspection and adjustment.

Handing

Closing Power Adjustment

DCE-2001 – Size 2 – 6 with 15% adjustment over size 6. The DCE-2001 Series is adjusted to size 3 before

leaving the factory. DCE-2001 – Size 1 – 4 with 15% adjustment over size 4. The DCE-2001 Series Door

Closer is specially designed for doors where the door opening forces shall be 5 LBF or less through 90°. The DCE-2001 Door Closer is adjustable up to a size 4. The DCE-2001 Series is adjusted to size 2 before leaving the factory.

Latching Power Adjustment

The DCE-2001 Series Door Closers have the provision to adjust the leverage of the arms by changing

the pivot position of the arm in the shoe. The shoe itself does not have to be removed from the door or jamb.

Arm Options

Color

Standard color:sliver/Costomized colors according to your requirement

Packing

All DCE-2001 Series Door Closers with standard arm sets are packed for mounting on standard, parallel arm or top jamb applications. All closer assemblies are packed 6 per carton. Tracks for track mounted closers are packed.

Thru Bolts and Sex Nuts

When thru bolting is ordered, factory will furnish sex nuts for use with the machine screws furnished with the closer. Nuts are sized to accommodate 1-3/8” or 1-3/4” thick doors.

Track Rail Arm

Forged Main Arm provides high strength with a reduced profile. Non-Handed.

Install