China prefabricated kit house villa - VILLA-SZ2

1.Energy-saving & enviorment protection, 2.Low-self weight and material saving, 3.Saft and durable, 4.prefabricated house - details see: https://www.buildingsupplieshub.com/china-prefabricated-kit-house-villa-10037838

Place of Origin: Shanghai China (Mainland)	Brand Name: Beststeel	Model Number: VILLA-SZ2	Prefab homes Structure: light steel
Roof tile: corrugated metal sheet, mason tile, asphalt tile or terracotta tile	Roofing Shape: hip roof,gable roof or flat roof	Wall: PU, RW sandwichpanel, fiber glass insulationboard	Use life: over 70 years
Earthquake resistance: Grade 9	Wind resistance: 56.1-61.2m/s hurricane	Thermal resistance: 6K.㎡/w	Sound reduction index: no less than 45dBfor thin wall or 66dB for thick wall
Endurable Temperature: -50 Centigrade to 50 Centigrade

contact supplier for China prefabricated kit house villa

Characteristics of prefabricated house

1. Dry condition, no pollution, no noise

2. 90% materials can be recycled.

3. Low-carbon

4. Steel quantity uesd for low-rise villa is below 30kg/2and that for multistoried building is about 40kg/2.

5. The self-weight of the whole structure is only 1/4 of tranditional brick-concrete structure.

6. Good anti-corrosive performance: 0.8-1.5mm AZ steel, AZ100-AZ150, Zn180g/2-275g/2

7. The section hight: 70-150mm

8. Steel yield strength: Q345-G550

9. No corrosion, mould or worm damage

10.Increase using space by 10%

11.Various metal parts, accessaries, insulation materials, finishes and tiles for your choise

12.Dead load: 0.48kpa

13.Roof snow load:1.20kpa

14.It takes 40 days for a building about 300-5002,with 25 days for installation.

15.14 skilled workers canassemble a500-600sqm prefabricated house in2 weeks.

Specification of prefabricated kit house villa

No.	Sort	Members	Descriptions
1	Measurement	length	custermized
		Roof Single Span	custermized
		Wall Single Span	custermized
		Clear height	BFS can do 3 storeys buildings with light gauge framing system
		Roof pitch	slope is 1:20(1.15°)~1:50(2.8°)
2	Specification	Roof	* 5:12 Roof slope; Roof truss at 24” (609 mm) O.C. connected to wall tracks * R30 Fiberglass insulation in the roof truss cavity * 1/2”(12mm) OSB board on top of the truss chord * Waterproof attached to OSB board * Mason tile,corrugated meatal tile,asphalt tile or terracotta tileshingleroofing (Standard) * 1/2”(12mm)Gypsum board for inside ceiling
		Exterior wall	* 3.5” (89 mm) Wall studs spaced at 16” (406 mm) or 24” (609 mm) O.C. anchored to the foundation * R13 Fiberglass Insulation in the wall stud cavity * 1/2” (12 mm) OSB Board Covered On the Outside of the Stud Flange * Breathing paper * 5/16” (8mm) cement Siding on the Outside surface of the Exterior Wall * Paint on the siding * 1/2” (12mm) Gypsum Board on the Inside Surface
		Interior Wall	* 3.5” (89 mm) Wall studs spaced at 16” (406 mm) or 24” (609 mm) O.C. anchored to the foundation * 5.5” (140 mm) Wall studs spaced at 16” (406 mm) or 24” (609 mm) O.C. in bathrooms for plumbing system * 1/2” (12mm) Gypsum board or waterproof Gypsum board on both Sides of the wall frames * Normal interior door, c/w frame and casing * Wall tiles in part of Bathroom and Kitchen
		Floor	* 10” (250 mm) or 12”(300mm) Floor Joists spaced at 16” (406 mm) or 24” (609 mm) O.C * 3/4” (18mm) OSB Board on floor joists * 1/2” (12mm) Gypsum board for the ceiling * Tiles in Bedrooms & living room. * Tile flooring in Bathrooms and Kitchen * MDF Baseboard
		Kitchen	* Laminate Panel Cabinets c/w hinges & laminated panel doors (Standard) * Brushed nickel handles & knobs on doors & drawers * Granite countertops c/w backsplash * Stainless sink c/w chromed goose neck faucet with sprayer
		Bathroom	* 60” (1524 mm) Bath tub c/w chromed shower faucets * Toilet 1.6 Gal. per flush * Granite countertop vanity * Lavatories c/w chromed faucets * Laminate Panel Cabinets c/w hinges & laminated panel doors (Standard)
		Others	* Steel stairs included * Plumbing and Electrical pipes (wires) systems excluded
		Channel	Galvanized Steel Plain Sheet press molding Material: Q235. Painted

Maximum supporting Spacing:

Applicatition	Span	Length
Roof	Single Span	1800mm
	End Span	2100mm
	Interval Span	2500mm
	Cantilever without supporter	200mm
	Cantilever with supporter	600mm
Wall	Single Span	2000mm
	End Span	2400mm
	Interval Span	2600mm
	Cantilever	400mm

Packaging Detail:Flat paper; other package box suitable for the container shipment; plastic strip 120 sqm prefabricated house members in a 40ft container 180 sqm loose house members in a 40ft container

Delivery Detail:30-50 days; Upon the quantity of order for prefabricated house