Ceramic window film - ZG-7090, ZG-6595, ZG-6099

Introduction

HZ serial heat insulation film is produced by 2ply processing technology. It is consequently consisted with antiabrasion layer, 1st PET layer, laminating layer, 2nd PET layer, mounting layer and protection layer. Antiabrasion layer is formed by heat curing coating and it has high hardness which will protect the film from scratch and abrasion. 1st and 2nd PET layer are both treated by discharge and combined together with laminating layer. Laminating layer is processed by heat insulation adhesive formed through rolling coating method. Mounting layer is taken shape by pressure sensitive adhesive doped with anti-UV additives. Protection layer is a release layer formed by polyester membrane after surface treatment of low energy materials. The as prepared heat insulation film has outstanding optical properties such as high VLT value, excellent UV cutoff and good IR rejected ratio. Highly tough PET film is adopted as substrate membrane of heat insulation film, which endows it high physical properties such as high mechanical strength, great resistance to high or low temperature and so on. The heat insulation film has got a strong self-adhesive layer, so it is easily mounted onto glass substrate and able to be adhered to glass firmly and solidly.

Specification

Application

1. Heat insulation film for construction

2. Heat insulation film for automotive

3. Energy saving film for automotive and construction

4. Explosion proof film

Installation

1. Spray rubbing alcohol and clean window glass.

2. Cut the film to the same size as window.

3. Heat the film to make sure that it can be firmly adhered.

4. Cut the edge of the rim charge.

5. Use soft rubber squeegee to get rid of bubbles and wrinkles.

5.Heatthe filmagain to make sure the film sticks well

Packing

1.52*30m/roll

Contact Us