Cementitous rigid waterproofing mortar (K11) - 828

K11 Rigid Waterproofing Slurry

YY-828

K11 rigid waterproofing slurryis a double component self curing liquid synthetic polymer that forms a thin, excellent, seamless waterproofing material.

1. Has unique penetrating function.

2. The waterproof layer doesn’t need the protective layer.

3. It is environmental product, no-toxic, no smell, non radiation.

4. Cement-based product has anti-aging, good weather resistance function.

5. Construction is simple, brush directly, greatly improves construction efficiency.

6. Has good two-way cohesiveness. Waterproof layer can be directly plastered and pasted.

1. Indoor and outdoor plane and elevation of concrete structure, bottom surface cementing, brick wall, light brick and

other institutions.

2. Be suitable for basement, parking place, swimming pool, water pool, kitchen, bathroom, and balcony and so on.

3.It can be used for wall repairing, tile fracture, and large-scale renovation waterproof.

1.Base plane must be firm, smooth, and free of dust, oil, release agents, batik materials and so on.

2.All the small gaps and hole can be filled which is mixed with powder with a small amount of water.

3.The exterior and internal angle should be round.

4.Leakage phenomena should be disposed firstly, and then start further waterproofing.

5.Base plane should be pre-wet, and be constructed after no clear water. That the construction could be faster, smoother; construction efficiency could be improved, material costs could be saved.

1.Mix 25kg powders with 9 latex for brushing; Firstly put latex into one container, and add slowly powder, and then stir completely, standing for 5 minutes then remix again could get better effect.

2.Brush using crossways more than 2 directions by roller or brush; depending on the standards of waterproof, base material and so on. The second time of construction should be done after 2 hours of the first one, it is the best time when the first layer not completely dry, or non-stick hand.

3.If it takes too long to dry the first layer, the construction should start after wetting the base plane and without clear water.

4.Keep stirring intermittently to prevent precipitation.

5.Within 24 hours of completion of the construction, should to prevent human trampling. When it is hot and dry, increase water curing in order to improve cohesion strength and waterproof effects.

1.Well-mixed sizing agent should be used within 2 hours, if it comes dry don’t add water and reuse.

2.Construction should be done from 5 to 40°C, cannot be done under 0°Cor rain.

3.Provide ventilation installation when construct in poorly ventilated or enclosed environment.

4.The construction should start after the base plane is wet and without clear water, which can greatly improve waterproof effect; if it takes long time between 2 times constructions that should start after wet.

Keep in cold and dry place, unopened powder is valid for 1 year, additives is valid for 6 months.

25kg powder+9kg liquid

Unit Dosage: 1.7-2.0kgs/ M2 (brush two coat)