Buy Cement-based Render for Thermal Insulation Panels - SA802

1)Ensures perfect adherence to thermal insulation panels, 2)Resistant to thermal shocks, 3)Easy to apply&forms smooth substrate - details see: https://www.buildingsupplieshub.com/buy-cement-based-render-for-thermal-insulation-panels-10082975
Place of Origin: Shanghai China (Mainland)Brand Name: ShunanModel Number: SA802Usage: Joint Mortar,Building Coating
Type: Cement MortarMain Raw Material: Cement , Sand , AdditivesState: Powder CoatingColor: Mainly grey
Buy Cement-based Render for Thermal Insulation Panels
contact supplier for Buy Cement-based Render for Thermal Insulation Panels


Dry mortar for ETICS(External thermal insulation composite system) >shunan.therm bctn

Shunan SA802 Cement-based render for thermal insulation panels

Cementbased fiber reinforcedrendering mortar. Good flexible, waterproof, water preservation and bonding properties. Shock resistance and anti-ageing, no poison and no smell

PRODUCT INFORMATION

PRODUCT PACKAGING

Weight: 25kg

Color: grey

Consumption: 4.5~6kg/m2

Shelf life and storage: 6 months after manufacturing date in dry ventilated place

Normative reference: JG149-2003

Colors

Grey

Field of application:

Applied as substrate render on XPS, EPS mineral wool thermal insulation panels at all buildings.
The function of this product is to protect the polystyrene board and fix the mesh. The finishing coat can be paint,render,plaster etc

Application substrates :

• On interior and exterior walls;
- XPS (extruded polystyrene),
- EPS (expanded polystyrene),
- Mineral wool,
Please consult us for all other application substrates.

Remarks:

1)Only mix with water, no other addition

2)The temperature of air and coat mortar must be from 5°C~35°C

3)The coat mortar must be used up in 3h

4)Avoid sunshine, high temperature and freezing

5)Avoid strong wind during application

6)Avoid rain during application

Consumption

4.5~6kg/m2

Mix ratio with water: 4kg/1l

Product specification

Application properties :

•Pot life :1 hours
•Application thickness :4 mm
•Coat thickness :Max. 2 mm
•Time between the coats :3-4 hours
Tools

electric-mixer,trowel,bucket

Substrate requirement

1) polystyrene board must be clean (no dust or dirt)

2)polystyrene board must be fixed stably (Wait min 24h before applying shunan.therm epsad

3)The surface of the whole EPS/XEPS wall must be level
Preparation

1)Polystyrene board must be fixed stably

2)Polish the polystyrene board to make sure the whole polystyrene wall is flat

application enviroment

  • Temperature:5°C~35°C
  • Avoid raining, high temperature and frost
  • Avoid direct sunlight and class 5 wind
Safety
  • May cause serious damage to eyes
  • May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin
  • Keep out of the reach of children
  • Avoid breathing the dust
  • In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
  • Wear suitable protective clothing,gloves and eye/face protection

SA802 is a part of External Thermal insulation System of Thin Plastering based on EPS/XPS insulation board

SHUNAN XPS SYSTEM BUILD-UP

1. Concrete

2. Polystyrene board Adhesive layer(interface treating agent is included)

3. Thermal Polystyrene foam board layers

4. Rendering coat mortar layer(SA802)

5. Fiber glass mesh layer

6. Rendering coat mortar layer(SA802)

7.Flexible external wall putty layer

8. Coating

Application of Shunan XPS system makes it possible to:

  • obtain the required thermal insulation properties of external walls,
  • extend the lifetime of external walls by protecting them from direct impact of atmospheric conditions,
  • create a long-lasting thermal insulation, resistant to mechanical damage, moisture and biological factors (decay),
  • use a single type of thermal insulation material on entire facades (XPS panels can also be used below the ground level) or, if necessary, combine different thermal insulation materials on one facade – the system is compatible with Shunan external thermal insulation system using expanded polystyrene (EPS) panels (in accordance with JG149-2003)
Packaging Detail:Net 25kg paper bag,also available on request
Delivery Detail:5 days

Related Product for Buy Cement-based Render for Thermal Insulation Panels