Building thermal insulation mortar Polymer Cement Mortar - CT-mortar

1:Waterproof, do it fast, high temperature,, 2:Excellent flexibility and adhesion properties, impact resistance, aging resistanc - details see: https://www.buildingsupplieshub.com/building-thermal-insulation-mortar-polymer-cement-mortar-10082808

Place of Origin: Shandong China (Mainland)	Brand Name: CaiTong	Model Number: CT-mortar	Usage: Plastering Mortar
Type: Mixing Mortar	Mixing Mortar Type: Cement-Lime Mortar

Building thermal insulation mortar Polymer Cement Mortar

Introduction :

Polymers Mortar are a number of imports, will be a variety of long - chain, in different proportions of short - chain polymer fit evenly in the formation of a special mortar dry powder premix products, mixed with water to construction at the scene.It has a good anti - seepage and crack resistance, impact resistance, aging resistance and properties of acid, alkaline, with Good adhesion to a variety of materials, with strong adhesion, non-toxic, tasteless, safety and environmental protection benefits.

Feature:

A:Water impermeability effect

B:High bond strength, can be formed integrally with the structure

C:Corrosion resistance ,

D:Humidity-resistant , anti-aging , good frost resistance

E:Non-toxic water-based products , in line with environmental requirements

Application :

Insulation board put ash, and stainless steel steel stranded line put ash ; buildings beam, and column, and board such as parts of strengthening ; corrosion sexual gas corrosion plant concrete building strengthening ; buildings crack, and hole, and peeling off such as parts of strengthening ; concrete cellular, and vulnerability, and crack, and protective layer damage leak reinforced such as defects patch ; EPS gathered benzene Board, and XPS squeeze plastic board outside wall insulation system the underlying ( Enhanced layer ) stick pick up.

Technical indicators:

Waterproof,repair and Reinforced special mortar (Standard:GB 50550-2010)
Model	Flexural strength (Mpa)			Compressive strength (Mpa)			Splitting tensile strength (Mpa)	Tensile bond strength (Mpa)	The critical grain size (mm)
Model	1d	3d	28d	1d	3d	28d
CT-1	≥4.0	≥6.0	≥10.0	≥15	≥25	≥45	≥5.5	≥2.5	1(Adjustable)
CT-2	≥5.0	≥7.0	≥12.0	≥20	≥40	≥60	≥7.0	≥3.0	1(Adjustable)
Plastering , masonry mortar dedicated (Standard:JGJ/T 220-2010)
Model	28 days compressive strength(MPA)			Consistency(mm)			Water retention (%)	Setting time (h)	28 days shrinkage ( % )
CT-3	≥15.0			100			92	5	0.3