brilliance aluminum door closer - SY-SH-6-017

1.aluminum door closer, 2. High quality products, 3. Competitive price, 4. Positive tolerance, 5. OEM welcome - details see: https://www.buildingsupplieshub.com/brilliance-aluminum-door-closer-10054654

Type: Door Closers,Fencing, Trellis & Gates	Place of Origin: Shanghai China (Mainland)	Brand Name: BRILLIANCE	Model Number: SY-SH-6-017
Material: Aluminum Alloy	Certification: ISO9001	Standard: DIN AMA	Alloy: 6063/6061/6005/6060 T5/T6
Finish: Anodizing, powder coating, wood clour, polishing, brushed	Procedure: Preciously Cutting, milling, drilling, punching, CNC machining	Focus on: Architecture,Industry,Home Appliance	Frame Finishing: Powder Coated
Frame Material: Metal

brilliance aluminum door closer

TABLE OF CHEMICAL COMPOSITION OF ALUMINUM ALLOY
Alloy	Si	Mg	Fe	Cu	Mn	Zn	Cr	Ti	Impurity		Al
Alloy	Si	Mg	Fe	Cu	Mn	Zn	Cr	Ti	Unit	Total	Al
6063	0.2-0.6	0.45-0.9	<0.35	<0.1	<0.1	<0.1	<0.1	<0.1	<0.05	<0.15	Surplus
6061	0.4-0.8	0.8-1.2	<0.7	0.15-0.4	<0.15	<0.25	0.04-0.35	<0.15	<0.05	<0.15	Surplus
6060	0.3-0.6	0.35-0.6	0.1-0.3	≤0.1	≤0.1	≤0.15	≤0.05	<0.1	<0.05	<0.15	Surplus

TABLE OF AMBIENT TEMPERATURE MECHANICAL FUNCTION OF SECTIONS
Alloy	Temper	Thickness	tensile test			hardness test
			Lntensity of stret ching resitance b Mpa	specified non-propertional stretching stress Mpa	Streatching rate %	Parterr thickness mm	HV	HW
			≥
6063	T5	ALL	160	110	8	0.8	58	8
6063	T6	ALL	205	180	8
6063A	T5	≤10	200	160	5	0.8	65	10
	T5	>10	190	150	5
	T6	≤10	230	190	5
	T6	>10	220	180	4

ADODIZINMG QUALITY
Grade	corrosion resistance			abrasive resistance
	CASS test		alkaline dropping test	sandtrial Abrasion coefficient f,g/um
	hours	grade	alkaline dropping test	sandtrial Abrasion coefficient f,g/um
AA10	16	≥9	≥50	≥300
AA15	32	≥9	≥75	≥300
AA20	56	≥9	≥100	≥300
AA25	72	≥9	≥125	≥300

Power coating quality
Gloss values	Thickness(um)		color variation	indentation resistance	adhesion	impact resistance	cupping test	presentation quality
	Max Thickness	Min Thickness
60	≤120	≥40	Color should be consistent with the sample color	≥80	0	No cracking and shedding phenomenon after the front impact test,small fine lines around the concave is allowed	No cracking and shedding phenomenon after the cupping test(6mm indentation depth )	The surface of the decorative profiles should be smooth and uniform. wrinkle,clamminess is not allowed

Classification	Application
Architecture	Door and window	Curtain wall	Louver	Handrail	Barrier	Gutter detritus	Shower enclosure	Solar panel	fence
Industry	Assemble lines	Heat sink	Ventilation	Transportation
Home appliance	Furniture parts	Chair	Table	White board	Ladder	Pet crate	Curling irons