Blue Mosaic Swimming Pool Tile(KN-12121211) - KN-12121211

If you do not like this kind of mosaic, you can gently move your mouse, take a look at the below Hot Sale mosaics, and hope you can find your favorite.

Style: Square

Thickness:8mm

Sheet size:300x300mm(12"x12"x0.3"),11sheets/m².

Plastic film on the each tile, foam separator in between two sheets, Fiberglass mesh on the sheet.

KN-12121211

♦Basic Information:

♦Common Pattern:

♦Some Product Performance Chart

♦Process of production:

1. Cut the big glasses into medium size with the help of machine.

2. Pressing the galsses to make them compact through the technical machine.

3. Colour the glasses.

4. Cutting the glasses into mosaic size.

5. Put the mosaic into 800~900°c oven make the corners round and make the color never fade.

6. Put the mosaic in order and paste up.

7. Stick meshes on the back of mosaic.

8. Quality inspection.

♦Installation instructions:

1).Wipe the wall to based on the foundation

Wipe out the wall and it must be base on the foundation and have the same color.(Confirmation method: leaning against the mosaic wall with the ground to see whether angle has).That’s very important. According to the proportion use the mixed adhesive to coat the wall, but can not be over the area of nine small squares. Use a spatula which has smooth edge and wiping out a layer zigzag stripes (zigzag stripes is helpful the mosaic paving). Now, you can prepare to stick the mosaics.

2).Paving and Fixed

At the back of the mosaic is network, so it can be directly pave on the wall with the adhesive. Please note that the gap between each set mosaic must to suit the marks which we draw the lines before. When finished paving mosaic, please pat the surface of mosaic by a board, so make them firmly attached to the wall. After each sets mosaic finished fixed on the wall, then fill sealant material in the seam,and confirm the gap between the mosaic must be the same width.

3).Prepare the sealant

Please attention the extent of sealant wet and dry. Too wet or dry make the mosaic easily to fall. Use a small gray shovel, taking a little amount of the mixed sealant each time, and then spread on the mosaic surface, the small gray shovel must be moved well mixed.

4).Cleaning

Began to clean the mosaic surface and keep the sealant to wet. Prepare two buckets, one in detergent, the other in water. First in detergent bucket soaked the cloth, do not wring dry, and then wipe it by circular manner on mosaic surface. Then in the clean water bucket soaked the sponge, using the sponge clean the mosaic surface.

♦Advantages:

1) Be widely used in decorating on outside wall and inside wall which sideis to bechoose

accordingto your feeling, other places like lobby, kitchen,floor, passageway,like other

place of entertainment, club, hotel…

2) Easy to install with usual tools, suitable for any odd places with whole sheet or small

chips.

3) Easy to clean, easy to lightening

4) Water-proof, wet-proof, acid-resistance

5) One item can be made in different colors,we also can produce as per your specification

and real samples.

♦Our Factory:

Production Capacity: 40 Containers per month

Factory Area: Factory1: 6500m²; Factory2: 12000m²

♦Our Workshop & Equipment:

Inspection: 100% inspected

Inspection Staff: 12 persons

♦Package:

1. According to different situations, some mosaic will carried every piece of plastic.

2. &(3/4/5) With carton packaging

6. Fixed the cartons on the tray.

♦Show Room:

Every Month: 20-30 designs

R & D Staff: 20 persons

♦ Pics In Exhibition:

In Shanghai Exhibition