Bitumode APP Waterproof Membrane - Alpha ,Beta,Gamma, Delta

What is Bitumode?

Produced by the Modern Waterproofing Company, Bitumode is a line of polymer-modified bitumen waterproofing membrane of the highest quality. Bitumode is modified by APP and APAO, thus guaranteeing superior performance under various conditions.

BITUMODE has 4 brands of APP waterproofing membrane as ALPHA , BETA ,GAMMA and DELTA

BITUMODE is APP modified bitumen waterproofing membrane reinforced with composite polyester (P) of non-woven polyester and with glass fiber filaments which provides high mechanical properties and dimensional stability.

BITUMODE is an enhanced features waterproofing membrane, can be applied virtually anywhere where torch applied modified bitumen membranes subject to high mechanical stresses and physical properties are specified and good cold flexibility features are required and also for structures subject to high water pressure,BITUMODE can be applied in:

• Single layer roofing system for high performance requirements
• Double layer system for basements, tunnels and underground structures subject to high water pressure
• Double layer roofing system combined with BITUMODE – G fiberglass reinforced
• Toilets and wet area inside buildings
• Retaining walls
• Under raft foundations
• Bridge deck waterproofing
• Lining of flower box
• Waterproofing of green area in roofs (for anti-root type)

BITUMODE with Mineral Slated Finish is recommended for exposed roofing system (Unprotected) for Non-accessible roofs or roofs subject to low traffic conditions

BITUMODE APP waterproofing membrane has been designed with special regard to providing clients with an excellent and versatile product. APP Waterproofing membranes reinforced with Polyester, Glass fiber suitable for all atmospheres With Cold Flexibility 0 : -15

Advantages ofBITUMODE APP waterproofing membraneinclude:

• Easy to apply (by torch)
• High mechanical properties
• Absolute impermeability to water
• Superb low temperature performance from 0°C up to -15°C
• Excellent high temperature performance
• Resistant to soil chemicals and salts up to certain limits
• Resistant to penetration of plant roots ( For - P Anti-Root products)
• Rot - proof
• Resistant to soil chemicals and salts up to certain limits
• Rot proof
• Excellent adhesion on any surface
• High dimensional stability
• Environmentally friendly

Quality Control

The Modern Waterproofing Company is ISO 9001 & CE certified. It applies a stringent quality control system utilizing its in-house laboratory. Occasional samples are analyzed by independent laboratories to ensure continued adherence to the highest standards (ASTM, EN, DIN, UNI, etc.).

Each roll of Bitumode is individually coded with a label containing all necessary information about the roll. This is intended to ensure tractability in accordance with ISO control standards.

Certification

This product is certified from the Egyptian government being in compliance with the quality mark of (EOS) and ASTM D 6222/2000

ProductRange

Standard thickness available includes 3mm and 4mm. Some types could be available by weight 3kg/m2 and 4kg/m2.

Bottom surface finish is normally Polyethylene Film (PE).

Upper surface finish choices include:

• Polyethylene Film (PE)
• Fine Sand (S)
• Mineral Slated Grey (GY)
• Mineral Slated Green (GRN)
• Mineral slated White (WT)
• Mineral slated Red (RD)

Slated rolls are available in 4kg, 4.5kg and 5kg per square meter.

The nominal length of each roll is 10 meters and the nominal width is one meter.

Special specification can be designed based on client’s needs.

Specification