Automatic Sliding Door Opener with Magnet Drive Unit - FRD-M-30

Automatic sliding door, a)Japanese techniques, b)Work by magnet, c)Manual force 13N, d)can hold 40Kg, residentail only - details see: https://www.buildingsupplieshub.com/automatic-sliding-door-opener-with-magnet-drive-unit-10047403

Type: Automatic Door Operators	Place of Origin: Zhejiang China (Mainland)	Brand Name: Dr-ferd	Model Number: FRD-M-30
Profile: 1.8m	Principle: work with magnet	Appliance: single

Automatic Sliding Door Opener with Magnet Drive Unit

Working principle& Structure,

220V or 110 V Alternating Current go through stator coil generate magetic field ,and it works with a permanent magnet. Applying pricinpile that poles always repel each other, so they will generate attraction & repulsion. Through transmission device, the power will push and pull door to open and close automatically.

Application,

1. Bed room 2. Kitchen room 3. Bathroom 4. Office&meeting room

Activation by,

1. Radar 2. Wire access controller 3. Wire press switch 4. Hand(Push&Go function)

NO wireless remote controller & user control panels

Specification,

Door model	Single
Installation	Build-in
Rated operation	Continuousely opening&closing
Door weight	Max 40kg
Door width	900mm
Opening speed	500mm/s(adjustable)
Closing speed	200mm/s(adjustable)
Hold-on time	1s-5s
Control system	Microprocessor Control, Renesas chips
Thrust	When 3 stator are lapped: 13N
Working voltage	110V-250V, 60Hz/50Hz
Door panels	Aluminum frame door & glass door
Measures	1.8m length
Priciple	Attraction &Repulstion of magnet
Installtion	Interior use: Office Building - Meeting Room, Smoking Room Hospital & Clinic Facility - Interview Room, Clinic Room, Disabled Toilet

Features,

Self-recovery	It can self-recovery if some faulty
Hold-on open ,half open	Door can open at any position ( not via user control panel)
Three working models	Automatic (via radar), Semi-automatic (close itself), Manual
Super quite	Less frictional points, little noise can be generated
Energy saving	No motor, no belt, less frictional points,etc, all can save much energy
Soft-motion safety	No need of additional safety sensor, the force is very ,very little
Assitance function	Push & Go - Moving the door by hand in the direction of open, the door will perform its automatic cycle.
Obstruction detection	During Closing: Safety Return. Re-close at low speed looking for obstruction
Emergency	In case of power failure, door is free to open by hand without resistance