Anti-Slip Shapes for Non-slip bath

Strong Adheisve. Various Size, Various shapes. Various color - details see: https://www.buildingsupplieshub.com/anti-slip-shapes-for-non-slip-bath-10016279

Type: Other Accessories

Place of Origin: China (Mainland)

Brand Name: shindorn

contact supplier for Anti-Slip Shapes for Non-slip bath

Change color from blue color to yellow color when water or air temperature is 40°C (104°F), more safe for Worker.

You can decide glue(fix glue or removable glue).You can decide glue thickness. You can decide various shapes, You can decide various size, roll or piece. You Can decide colors in my Shin Dorn factory.

Quick Details: (Anti-slip roll)

Material: PVC or TPU or Rubber Rubber is good smell	Use: Toilet and Kitchen or tub or various stairs or baby furniture or Various Wall.
Adhesive side: Single Sided	Adhesive : Acrylic or Rubber
Adhesive type: Water activated	Design printing: Clients offer
Color: Any	Pattern: Any
Brand name: Glutex or ShinDorn	Width: 3cm to 112cm (roll)
Length is 5m to 1500m (roll)	Pass Reach standard.
Waterproof	Service time: 2 years.
Weather resistance	Thickness is 0.9mm
Glue thickness is 0.02-0.1mm	PVC thickness is 0.7mm
Removable adhesive	No damage floor or tub or wall or stairs when remove
Fit various material tub or floor	Stick on Wall or Floor or Tub.

Packaging & Delivery:

Packing detail	packing as buyer need or normally in carton
Delivery Detail	20-40days

Specifications:

Use range	Effectively prevent people slipping on massage room, shower, bathroom, washroom, lavatory, wet place, kitchen, step stairs. toilet, massage bathtub, bathtub, stair, wet place, especially old people, kids, and workman
Surface	comfortable and obvious concavo-convex surface.
Color	1-10 printing color on transparent PVC
Glue Viscosity	1. 25°C is 2800-3500cps/LTV. 2. Glue thickness is 0.10m/m 3. Glue solid cement 55% 4. Curing time: 20-30 minutes for finger touch, 24hours for whole dry.
Pass test by SGS	EN71 part III, part 9, ASTM963.03, ASTM D3421-75, no BBP, no No DBP, no DEHP, it fit Europe Reach standard and U.S.A. TSCA standard.
Features	water and weather resistance
Use way	1. Clean the floor or Wall 2. Tear out the paper of treads, and put it on place as you wish
How to apply	1.For porcelain, steel, and cast-iron tubs or stairs, clean tub or stairs surface with non-abrasive scouring powder and warm water. For fiberglass, ABS and other plastic tubs or stairs, clean surface according to manufacturer’s instructions. Warning: Do not use liquid or aerosol cleaners to prepare surface or tub and stairs treads will not adhere properly. 2.Rinse thoroughly. Allow the tub to dry. 3.Arrange tub or stairs treads in the tub or stair with the backing in place to determine ideal positioning. 4.Position tub or stairs treads at least one to three inches apart for better surface coverage. 5.Remove backing from tub or stairs tread and apply one at a time to tub surface. 6.Press tub or stairs tread evenly on the tub or stair surface and try to avoid stretching. 7.Repeat steps 4 and 5 with additional tub treads until all the tub treads are applied. 8.Allow the tub or stair treads to stand for at least 12 hours before using tub or shower or stairs or massage room. .
How to remove (If use removable glue)	1.Lift corner of tub or stair tread with finger nail, wood or plastic scraper. Warning: Do not use metal, glass, or other abrasive scraper to remove. 2.Slowly Peel back tub or stairs treads until removed. 3.If any adhesive residue remains, clean with aerosol stain remover. 4.Allow to soak for 15 minutes and wipe with a dry rag. Repeat as necessary. 5.Rinse thoroughly. Allow the tub to dry. If you choice Fix glue, it will fix on position as you stick. It is difficult to remove in 2 years
Dry time	Drying/curing condition: room temperature 24 house.
Color	Various color as your wish.
Shape	Animals, sea Animals, car, dolls, flowers and trees. Various shapes as your wish
Factory pass	ISO-9001:2008 Quality serious system and ISO14001:2004 Environment system.