Anti-crack plaster mortar for EPS/XPS board panel - YY-712

Anti-crack plaster mortar for EPS/XPS board panel

YY-712

1.It has great cohesive force and good adhesive strength in different basal plane that overcome the phenomenon such as weak bonding, hollowing and cracking of ordinary cement mortar.

2.It has good workability and anti-sag resistance that increase construction efficiency and the flatness of finished plane.

3.It has good water retention. It is not easy to create cracks after hardening.

4.It has good cracking resistance and seepage-proofing, which will support better protection for the wall.

5.Construction is easy after adding the water.

6.It is non-toxic, harmless, and no radiation.

1.Apply to the external walls and internal walls self-leveling of building.

2.Apply to self-leveling of building thermal insulation system.

1.Base plane should be no grease, release agents, rusty metal, wooden meal, paint, plastic, dust and other any pollutants which can affect the cohesive strength of mortar.

2.The base materials should be pre-wet by water before construction.

3.Treat the base plane by interface treatment agent to improve the cohesive strength when repair the concrete.

Pour one pack (50kg) of anti-cracking plaster mortar into a container with 10-10.25L water, stir completely with electric stirrer for 3-5 minutes. Then scrape the paste until getting required thickness.

Product could harden under normal temperature conditions. The construction no need water maintenance, but need water maintenance in high temperature and dry weather to ensure the strength development.

Keep in cold and dry place, unopened product is valid for 1 year.

Spec

25kg/bag