Aluminium Strip Ceiling Panel Module Wide 100,150,200,300mm - Aluminium Strip Ceiling

Roll Forming Lineal Ceiling

Panels: 100mm wide make of 0.5 mm / 150, 200 and 300 mm wide make 0.7 mm thick Aluminium Alloy-5005 H34 in PDVF 2 coat thickness 28 microns in combination primer / basecoat on back coil, roll forming panel to 18 mm groove gap or non-groove flush joint, non-perforated and perforated 1.8 mm diameter hole 18% of the perforation area with non-woven tissue. Customise cutting length approx 6 to 7 metre, colour according to avilability RAL colour chart.

Panel Carrier: make of 0.5 mm thick enamelled steel, colour black or G/I hot-dipped galvanised steel 68 mm wide, 28mm deep, flange 10 mm the flanges have prongs to hold the panels, standard module 100 / 200 /300 combine and 150 / 300 combin, close gap and ( wide of 18mm groove gap ) are also possible, carrier are design for out door open area, canopy, linkway, high bay which strong wind load with extract locking for panel.

Specialized In Architectural Metal Ceiling Manufacture of Clip-In Tile Panel with beveled non-perforated and perforated 600mm x 600mm and customise non-standard size panel. Strip Ceiling In 82-18mm groove or non-groove 100mm module, 132-18mm groove or 150mm non-groove module, 182-18mm groove or 200mm non-groove module and 282-18mm groove or 300mm non-groove module perforated and non-perforated with full accessiories and to customise cutting length.