All Purpose Powder Filler - SA824

All Purpose Water- Resistant Durable Filler

For both interior and exterior use, with added PVA for extra strength. For repairs to plaster, brick, stone, wood, can be nailed or screwed when dry. Quick setting, non-shrink.

One component,preblended, cementitious outdoor wall plaster which, when mixed with water,

is used prior to the application of finish coating,durable fillers,suitable for outside projects.Durable fillers,fill cracks and splits on exterior surfaces.

Product information

Packaging

· Weight: 25 kg

· Color: white

· Consumption: 1.5 ~ 2kg/m2

· Shelf life & storage: 6 months after manufacturing date in dry ventilated place

· Standard:JC/T157-2009

Product advantages

· Easy to use, just mix it with water

· Excellent weather resistance

· Good application ability, easy to apply and polish

· Good water-resistant and water vapour transmission ability

· High adhesive strength

· Good match with substrate and finish coating

· ISO9001 quality management system

· Green building material certificate

Field of application

· Suitable substrates: cement mortar, concrete

· Exterior for building

Limits of use

· Not suitable to use on oil substrate

· Not suitable to shrinkable substrate

Consumption

1.5 ~ 2 kg/m2

Technica Data

Application temperature: 5°C~35°C

Pot life: 2 hour

Water addition per 25kg bag: 8~9liters

Tools:

Elec-mixer,Bucket,Trowel

Substrate preparation

· Clean the substrate until free from dust, oil, or any other stains

· When high temperature season or dry substrate, substrate should be wet one day before

Application

· Put 8~9 liters clean water in a bucket. Gradually add one bag (25 kg) of powder into water

· Mix properly until homogeneous and lump-free

· Leave the product for 5~10 minutes. Then mix the second time for 1~2 minutes

· Apply the 1st coat of product onto the substrate. When the finish is dry, apply the 2nd coat. Each thickness is about

0.5~0.6 mm

· Ensure a flat, smooth and pinhole free coating

· Normally, after 24 hours (depend on weather and substrate), polish the surface

· After that, apply the finish coating

Application environment

· Temperature: 5°C~35°C

· Avoid rain, high temperature and frost

· Avoid direct sunlight or strong wind

Safety

· May cause serious damage to eyes

· May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin

· Keep out of the reach of children

· Avoid breathing the dust

· In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor

· Wear suitable protective clothing,gloves and eye/face protection