Adhesive ground coat - SA802

1)Does not require heated shipping or storage,just add water to mix, 2)Use for small repairs,reduces dumpster and landfill costs - details see: https://www.buildingsupplieshub.com/adhesive-ground-coat-10082873
Place of Origin: Shanghai China (Mainland)Brand Name: ShunanModel Number: SA802Usage: Joint Mortar
Type: Cement MortarComposition: Cement , Sand , Additives etc.Product Category: FacadeApplication: EIFS Basecoat
Adhesive ground coat
contact supplier for Adhesive ground coat


Shunan SA802 Adhesive Ground Coat is an adhesive and base coat

A comprehensive line of base coats and adhesives used to embed mesh or adhere EPS to approved substrates or EPS.

PRODUCT INFORMATION

PRODUCT PACKAGING

Weight: 25kg

Color: Natural cement gray

Consumption: 5~6 kg/m2

Shelf life and storage: 6 months after manufacturing date in dry ventilated place

Standard: JG149-2003

Water addition: 0.22 liter/ kg powder (5.5 L of Water for 25 kg of mortar)
Features:
♦ Dry, bagged products

Does not require heated shipping or storage; just add water to mix
♦ Mix only what you need

Use for small repairs; reduces dumpster and landfill costs of pail disposal

♦ Low cement-to-polymer ratio

Reduces the chance for efflorescence

♦ Smooth, creamy consistency

Trowels on easily; speeds mesh embedment; reduces applicator arm fatigue

♦ Vapor permeable

Allows for the passage of moisture vapor

EPS adhesive for the following substrates:

1. Exterior grade gypsum sheathing

2. Glass Mat gypsum sheathing

3. Masonry, concrete and cement board

4. EPS

Uses
• To adhere EPS insulation board to approved substrates
• To adhere EPS insulation board to EPS insulation board
• As a base coat to embed reinforcing mesh

Remarks:

1) Only mix with water, no other addition

2) The temperature of air and glue must be from 5°C~35°C

3) The glue must be used up in 2h

4) Avoid sunshine, high temperature and freezing

5) Avoid strong wind during application

6) Avoid rain during application

Consumption

4.5 ~ 6 kg/m2

Product specification

Items

Data

Tensile adhesive strength

(with foamed polystyrene)

≥ 0.10 N/mm2

(polystyrene board damaged)

Water resistant tensile adhesive strength

(with foamed polystyrene)

≥ 0.10 N/mm2

(polystyrene board damaged)

Pot life

Tensile adhesive strength

(with foamed polystyrene)

1.5 ~ 4.0h

≥ 0.10 N/mm2

(polystyrene board damaged)

Compressive /flexural strength %≤ 3.0

Tools

electric-mixer,trowel,bucket

Substrate requirement

1) Polystyrene board must be clean (no dust or dirt)

2) Polystyrene board must be fixed stably (Wait min 24h before applying shunan. therm epsad)

3)The surface of the whole polystyrene board wall must be level
Preparation
·Polystyreneboard must be fixed stably

• Make sure the whole polystyrene wall is flat

application enviroment

1) Temperature:5°C~35°C

2) Avoid raining, high temperature and frost

3) Avoid direct sunlight and class 5 wind

Safety
1)May cause serious damage to eyes
2) May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin
3) Keep out of the reach of children
4) Avoid breathing the dust
5) In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
6) Wear suitable protective clothing,gloves and eye/face protection
SA802 is a part of Shunan - External Wall Insulation systems of external building walls

SHUNAN EPS SYSTEM BUILD-UP

1. Substrate( e.g.,concrete)

2. Adhesive/Attachment

3. Insulation Foam

4. Base Coat

5. Reinforcing Mesh

6. Anchor

7. Base coat

8. Flexible Tile adhesive

9. Tile/Natural Stone

10. Flexible Tile grout

Packaging Detail:25kg 80 Per Pallet
Delivery Detail:5 days

Related Product for Adhesive ground coat