75g 4mm*4mm strengthening fiberglass mesh for stucco - 75

fiberglass mesh

Main Characteristics

1.Good chemical stability: Alkali-resistant, acid-resistant, waterproof, cement erosion-resistant.

2.Outstanding process :Include coating enough alkali-resist glue

3.Our fiberglass yarn is supplied by Jushi Group which is the largest producer of fiberglass yarn in the world

it own 20% extra strength and beauty surface than normal fiberglass yarn!

4.Good dimensional stability, stiffness, smoothness an difficult to shrink and deformation, good positioning property..

5.Good impact resistance and not easy to be teared.

6.Fire resistant, thermal insulation, sound insulation, insulations etc

Application:

1. Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall

board, gypsum board, bitumen etc)

2. Reinforced cement products.

3. Used for Granite, mosaic, marble back mesh etc.

4.Waterproof membrane fabric, asphalt roofing.

5. Framework material for reinforced plastics, rubber products,.

6. Fire board.

7. Grinding wheel base fabric.

8. Road surface with geogrid

9. Construction caulking tape etc.

Specifications:

1.9x9 mesh, 8x8 mesh, 5x5 mesh, 4x5mesh, 4x4 mesh, 2.5x2.5 mesh and so on

2. Weight/sq.meter: 45g—300g

3. Each roll length: 10m,20m,30m,50m—300m

4. Width: 1m

5. Color: White (standard) blue, green, orange, yellow and others.

6. We can produce many specifications and use different packaging according to customers’ requests.

Useage:

1. 75g / m2 or less: Used in the reinforcement of thin slurry, to eliminate small cracks and scattered throughout the surface pressure.

2.110g / m2 or about: Widely used in indoor and outdoor walls, prevent the various materials (such as brick, light wood, prefabricated structure) of treatment or caused by a variety of expansion coefficient of wall crack and break .

3. 145g/m2 or about: Used in the wall and be mixed in various materials (such as brick, light wood, prefabricated structures), to prevent cracking and scatter the whole surface pressure, especially in the external wall insulation system (EIFS ).

4. 160g / m2 or about: Used in insulator layer of reinforcement in the mortar, through shrinkage and temperature changes by providing a space to maintain movement between the layers, prevent crack and rupture due to shrinkage or temperature change