60-120minutes single sheet fireproof glass,fire rated glass - GM05

Fireproof Sort: C (meet with the fire-resistance requirement.)

Characteristic:
Excellent Fire-resistance Performance
It can keep well for more than 90 minutes under the 1000 degrees flame impact, it saves precious time for escape and fire disaster salvation.
High Strength Performance
It has excellent function of fire-resistance, meanwhile it has the prominent intensity and high rigidity, with the same thickness, the intensity is 6 to 12 times harder than float glass, is 2-3 times harder than tempered glass.
Security Performance
When broken, the fireproof glass falls into small round granules, smaller than the fragment of the tempered glass, thus it will not hurt people.

Weather Ability
Comparing with the filling type or laminated fireproof glass, the most obvious characteristic of the single sheet fireproof glass is weather ability, besides the high intensity, under long time irradiation of the ultraviolet radiation, nothing changed on the surface or the function, it maintains bright and transparent for a long time.

Good Processability
Single-chip Fireproof Glass can be used directly or processed into Fire-resistant Laminated Glass, Fire-resistant Insulating Glass, Fire-resistant Curtain & Wall Glass, Fire-resistant Coated Glass, etc.

Application scope: fireproof door, fireproof window, fireproof partition wall, and sunshade, floor, curtain wall, barrier that requires the fire-resistance function.

Technical parameters for the single sheet fireproof glass:

Standard Implementation: National Standard: GB15763.1-2001.

Notice:
1. Single sheet fireproof glass cannot be used in the place where the heat-resistance and heat-radiation resistance function is clearly required.
2. Single sheet fireproof glass is the safety glass that is trough special treatment, when finished, it cannot be cut, drilling holes, polished edges further. The buyer must provide the right size and shape of the glass when confirming order.
3. Scratches in the glass surface should be avoided in the carry and installation process.