50micro UV protection twin wall polycarbonate hollow sheet - GWX-H037

50micro UV protection Lexan twin wall polycarbonate hollow sheet

pc hollow sheet details

Note: special specifications can be customized.

Guangzhou GWX-H037 100% Lexan material 10 years warranty polycarbonate sheet roofing sheet at best price

Pc hollow sheet advantage

1.Light transmission:Fine light transmitting rate approve to 30— 85%.
2.Weather resistance:With anti-UV inhibition on the surface, it can prevent the resin from fatigue and yellowing caused by UV. The anti-UV agent on the surface can change the UV absorbed by chemical bond into visible light, and finely stabilize the photosynthesis of plants.
3.Impact resistance:With the strength 250 times than the ordinary glass, 30 times than the PMMA sheet, it has less risk of breakage
4.Fire retardant:Fire retardant is up to B2 level (based on National GB8625-88 testing, without flame or toxic gas).
5.Temperature toleration:Without deformation within the temperature range from-40°C to +120°C.
6.Sound insulation:It is the best transparent materials for sound insulation engineering as expressways, factories, etc.
7.Portability:Easy for handling and drilling, won't be breakage when cutting, simple and easy be treated in using.

GE Lexan sheet applications
1) roofing for swimming pool, shopping malls, commercial streets
2) Sunshade for stadiums and bus stops, gazebo, open air carport
2) lighting canopy for corridors, passages and subway entries
3) ATM machine covers, telephone booth, gateways, garages
4) Sound and heat insulation wall for expressways and houses
5) Instead of glass, decoration door, curtain wall
6) Soundproof material for partitions
7) Unbreakable material for glazing widows, roof glazing.
8) Lighting of modern villa, rain-proof lighting shed of underground garage entryway
9) Front wind shields of motorcycles, airplanes, trains, liners, vehicles, motorboats, submarines and riot shields

Technical data

Package

Accessories

Installation instructions

1.PC sheet do not contact the surface of cement walls.

2.Clean the frame so as to keep smooth of notch.

3.Use the appropriate sheet thickness which allow enough curvature radius.

4.Allow enough space for the expansion of panel. At least 30 mm distance between screw hole and the panel's edge.

5.Use the neutral silicone,don't use PVC stripes.

6.Use the dynamoelectric cutting tool,(Tungsten carbide blade). please make sure the panel is stable to avoid its shaking.Forbid tear away the film on the surface before cutting.

CLEANING & MAINTENANCE

According to correct procedure, suitable cleanser and tools are used to clean the sheets regularly. It could keep the sheets graceful and extend the sheets’ useful life:

1. Rinse sheet with lukewarm water (under 60°C)

2. Please choose cleanly and soft cloth or sponge with neutral liquid soap or detergent to clean the dirt on the surface lightly

3. Rinse sheet once again

4. The soft cloth with anhydrous alcohol could be used for cleaning, if oil, wet paint, glue spotting and other things are on the sheet..

5. Rinse with cold water and dry with a soft cloth to prevent water spotting after cleaning.

Recommendation of using solvent for cleaning

Absolute alcohol, Petroleum ether, Hexane

NOTICE

Steel wool, brushes and other crude material are not allowed to contact with the PC sheet.

Do not use drawknife, razor and other edgy tools to scratch PC hollow sheet.