40 mm ceramic cartridges - N40H
1.ceramic disc faucet valve, 2.40 mm diameter, 3.Spiingdle free rotation, 4.with foot base, 5.material: Ceramic plastic - details see: https://www.buildingsupplieshub.com/40-mm-ceramic-cartridges-10063408
Type: Faucet Cartridges | Place of Origin: Zhejiang China (Mainland) | Brand Name: kone | Model Number: N40H |
Material: Ceramic | color: Yellow | Certificate: ACS | life time: 70,000 cycles |
Gurantee: 5 Years | materail :: ppo ,pom,nylon ,ceramics | | |
ceramic cartridges
Max.temperature: 90°C | Gland nut torque: 8-12N.m(advice 10N.m) | Max.turn angle:100° | Noise level: Max.20db at 3bar(with noise reducer) | Max.opening angle:23° | Lever break torque: ≥15N.m | Lever torque test: 0.2—0.3N.m(static pressure at zero) | Ceramic disc: 1.Material: AL2O395% 2.Hardness: ≥1150HV5 3.Flatness:0.3μm 4.Roughness:0.2μm 5. Porosity:60%—80% | Burst test pressure: water static pressure Max.3.5MPa | Air pressure test: 0.8MPa(one by one tested by 100%) |
|
According to the (GB18145-2003), dynamic pressure under 0.3, without any condition, flow rate of bathtub should be ≥0.33 L/S; basin should be ≥0.20L/S. (Detail specification of products, please refer to the below table) Flow rate change under different pressure: |
|
| Pressure (Bar) | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | 3.5 | 4 | Average flow rate(L/min) | 14.5 | 17.1 | 20.3 | 23.2 | 25.8 | 28.2 | 30.2 | 32.1 |
| | |
|
|
|
|
Test Item | Outlet status | pressure (MPa) | time(s) | Technical Requirements (according to GB18145-2003) | Test Conclusion | Inlet
| Open
| 1.6±0.05 | 60±5 | No leakage
| Qualified
| 0.4±0.02 | Outlet
| Close
| 1.6±0.05 | 60±5 | No leakage
| Qualified
| 0.4±0.02 |
|
|
Cold /Hot water cycle test: |
Put cartridge into -20±2°C and 95±2°C environment in turn. Every 12 hours as a period, do three times cold and hot water test continually; after that, put cartridge into 80±5°C water and mild water in turn in every 40 seconds, do 450 cycles continually. No leakage after cold/hot water cycle testing. |
|
|
According to the EN817,GB18145-2003 standard test more than 70,000 cycles (hot water temperature: 65±2o,cold water temperature: ≤30o,pressure: 0.3±0.05Mpa); According to the ASME A112.18.1-2005 standard test more than 500,000 cycles (hot water temperature: 66±6o,cold water temperature: 10±6o,pressure: 0.3±0.05Mpa). Technical data(according to ASME A112.18.1-2005) as the following table. |
|
|
Packaging Detail:50pcs/inner box , 300 pcs /ctn |
Delivery Detail:25-30 DAYS |
Related Product for 40 mm ceramic cartridges