2mm hdpe geomembrane for like liner - HDPE

2mm hdpe geomembrane for like liner, 1.Thickness:0.2--3mm, 2.Material:Virgin and recycled, 3.Certificate:ISO - details see: https://www.buildingsupplieshub.com/2mm-hdpe-geomembrane-for-like-liner-10057745

Type: Geomembranes	Place of Origin: Shandong China (Mainland)	Brand Name: Starring	Model Number: HDPE
Material: HDPE	color: black or as your requirment	weigth: 300-2400gsm	length: 50m-100m
thickness: 0.2-3.0mm	width: 1m-8m	Certificates: BV	Certificate: ISO9001
standard: ASTM	Market: South America, South Africa, Mid-East, Asia	advantage: factory price with top quality

2mm hdpe geomembrane for like liner

Production Description

Polyethylene Liners are a range of environmental protection liners for sealing
applications.

These include HDPE (High Density Polyethylene) LDPE (Low Density Polyethylene)
and LLDPE (Linear Low Density Polyethylene). Available in a range of thicknesses
and surface textures.

Features
• Versatile sealing applications possible
• Excellent chemical resistance due to selected raw materials
• Extreme high elongation during uni-axial and multiaxial deformation
• High stress cracking resistance
• Very high UV-resistance
• Direction independent shear stress transfer with structured surfaces
• High interface friction angles with embossed structured surfaces
• Slope dependent structured surfaces available for project specific designs
• Complete quality control from the resin to the final product

• High Melt Flow Index allows an excellent welding performance
• Smooth edges with removable plastic tape for clean welding surface and overlap lines
• ISO 9001: 2000 certified

Purposes:

landfill, sewage or sludge treatment impermeable.
Dyke, Lake dam, tailings dam, water dam and reservoir area, channels, hair liquid pool (pit mining).
subways, basements and tunnels, the tunnel lining impermeable.
roadbed and other foundation saline seepage.
embankment, the level of upstream impervious blanket, foundation vertical impermeable layer, cofferdam construction, scrap yards.
sea water, fresh water fish farms.
roads, highways, railways foundation; expansive soil and collapsible loess waterproof layer.
roofing seepage.

Technical Parameters (GRI-GM13)

Properties	Test method	GM SH075	GM SH100	GM SH125	GM SH150	GM SH200	GM SH250	GM SH300
Thickness	D5199	0.75mm	1.00mm	1.25mm	1.50mm	2.00mm	2.50mm	3.00mm
Density	D1505	0.940	0.940	0.940	0.940	0.940	0.940	0.940
Tensile properties 1. Yield strength 2. Breaks strength 3. Yield elongation 4. Break elongation	D6693 Type IV	11KN/m 20KN/m 12% 700%	15KN/m 27KN/m 12% 700%	18KN/m 33KN/m 12% 700%	22KN/m 40KN/m 12% 700%	29KN/m 53KN/m 12% 700%	37KN/m 67KN/m 12% 700%	44 KN/m 80 KN/m 12% 700%
Tear resistance	D1004	93N	152N	156N	187N	249N	311N	374N
Puncture resistance	D4833	240N	320N	400N	480N	640N	800N	960N
Stress crack resistance	D5397(App.)	300hr	300hr	300hr	300hr	300hr	300hr	300hr
Carbon black content	D1603	2.0%	2.0%	2.0%	2.0%	2.0%	2.0%	2.0%
Oxidative induction time (OIT)	D3895	100 min	100min	100min	100 min	100min	100min	100min

Method of installation

The HDPE was supplied 8m wide rolls of approximately 200m in length. To allow easier installation, reduce labour requirements on site, and reduce the amount of joining in wet and dirty site conditions,

some workshop prefabrication was undertaken. Approximately four water authority personnel and three from the supplier were required to install the material, which included welding sections together.
The 200m section was laid and welded in approximately two days. The liner was anchored in trenches along the channel bank and the end treatment utilised geosynthetic clay lining (GCL).

Packaging Detail:PE film and woven bags or as your demand

Delivery Detail:Within 15 days after receiving the deposit