1x1 Foshan decorative crystal glass mosaic bathroom tile - KHDP_GT0001

1x1 Foshan decorative crystal glass mosaic bathroom tile

Ten reasons u must chooseDEPROglass mosaic tiles

1. Factory direct products and price from Foshan, China No.1 mosaic city;

2. Fast OEM service and delivery;

3. Customized mosaic design;

4. Various kinds of materials choices, such as glass, stone, stainless steel, aluminium, copper, mother of pearl, coconut and etc;

5. Retail orders accepted;

6. Pros for US and EU market;

7. Strict QC standards;

8. Large daily products capacity;

9. Annual mosaic design creation;

10. 24 hours after sale service.

Specifications

Advantages

1. Water proof and heat resistance;

2. Various colors and patterns;

3. Easy installation;

4. Lifetime warranty;

5. Low cost, best decorative effect.

Flow chart

Original material→Batching→Melting→Pressing→Annealing→Break up→Selection→Assembling→Back Meshing→Finished in Stock

Color chips

Glass mosaic tile series

Gold foil glass mosaic tile series

Stone mix glass mosaic tile series

Strip glass mosaic tile series

Strip stone mix glass mosaic tile series

Stainless steel mix glass mosaic tile series

Irregular glass mosaic tile series

Payment terms

1. 30% deposit T/T in advance, 70% balance T/T before shipment;

2. L/C at sight;

3. West Union, Escrow and etc.

Packing

Project sample

AboutDEPRO

1. Five years old mosaic tiles supplier from Foshan, headquater of mosaic tiles in China;

2. Self-invested factories manufacturing glass mosaic tiles, stone mosaic tiles and etc.;

3. Deep exploration into US and EU market for over six year from very beginning;

4. Member of Foshan building material association and mosaic association;

Factory highlight

Professional staff team

How do I start mosaicing right now?

For an indoor project not subjected to moisture, it is very simple:

1. Draw a simple "cartoon" (outline) on the surface. You can copy one from a coloring book or your favorite pattern of china or fabric if you aren't an artist
2. Decide what size tiles are most appropriate for the level of detail in the design. Lay a few tiles down just to make sure the colors look right together.
3. Glue the tiles to the surface one at a time with Weldbond. Make sure the gaps between the tiles are about 1/8 inch or less.
4. After the glue cures for 24 hours, grout the mosaic with regular bathroom tile grout.
5. For more complicated designs, you can lay the project up on mesh (by gluing sparingly with Weldbond), or you can pick up the tiles with clear contact paper. In either case, the next step would be to spread glue or cement on the surface and press the sheet of mosaic onto the glue or cement.

For an outdoor project or a project subjected to moisture, you should probably use thinset (a type of sticky concrete with polymers added for strength and water resistance. Thinset is available at building material stores. You should also seal the mosaic with a tile and grout sealer from your local hardware store.

How much grout do I need for my mosaic?

How much grout you need depends on three things:

1. the area of the mosaic = L x W
2. the thickness of the tiles
3. the gaps between the tiles

If the tiles are spaced with all gaps under 1/4", then you should be able to cover the entire mosaic of 18" x 18" with 2 lbs of grout. This is assuming your tiles are under 3/8" thick. I always set my mosaic on an old shower curtain or piece of plastic to catch all the wet grout that falls off the side as I'm spreading it. That way, I can scoop it up and use it. Otherwise you need a lot more grout because most is wasted.

Note that a standard grout gap is 1/16". If you keep your grout gaps small and uniform like this, you will use less grout, and it will be easier to grout. If your grout gaps are wider than 1/8", then it is difficult to wipe away the excess grout without eroding the grout from between the tiles.

ContactDEPROnow for your favorite glass mosaic tiles!!!