1.0-2.0mm self-adhesive waterproof membrane - self adhesive waterproofing material

DESCRIPTION:
YG seal Self Adhesive membrane consists of a reflective aluminumfoil coated with a thick layer of rubber modified bitumen protected by a tough, tear-resistant liner. The product is available in two finishes - bright aluminium or Black HDPE. A tropical grade is also available which offers improved high temperature performance.

TYPICAL USES:

General:

Vehicle maintenance and repair, sealing around pipes and tanks, repairs to weatherproof enclosures, sealing over wood, concrete brick most metals and some plastics.

Construction:

Flashing & Sealing to felt asphalt and bitumen surfaces, flashing of conservatories and porches, roof skirtings and parapet joints, sealing of rooflights, vents, pipes, and other openings, repair bandage for gutters and roofs, sealing glazing bars, cappings and protective coverings.

STORAGE:

Store the rolls horizontally between +5 dg C and 25 dg C in dry conditions in original packaging. Shelf-life approximately 12 months.

SURFACE PREPARATION:

Surfaces must be clean of dirt loose material, grease and oils. Rough or porous surfaces must first be treated with Webbseal Bitumen Primer.

APPLICATION:

Do not apply to very cold frosted surfaces. Trim the materials to the required length/shape allowing an overlap of at least 25 cm where the material is to be joined. On stepped flashing begin at the lowest level and work upwards. Warming the tape using gentle indirect heat will help the adhesion and make the tape more workable in cold temperatures. Ensure that there are no air pockets. Apply even pressure over the entire surface using a non-abrasive tool e.g. cloth or hand roller. Take care not to stretch or puncture the foil during application.

CHEMICAL RESISTANCE:

Do not expose to petrol, white spirit, paraffin and similar organic solvents which will dissolve the bitumen.

LIMITATIONS:

The user is advised to conduct tests to determine the suitability of the product for the
Intended application.

CHARACTERISTICS AND PROPERTIES:

*ASTM D1000 **ASTM D 1004

AVAILABILITY – STANDARD SIZES:

Standard Roll length 10 meters.

HEALTH & SAFETY

Uncured product may irritate the eyes, respiratory system and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention. Use in well ventilated areas. Keep out of reach of children. Use gloves and protective clothing. Do not ingest. For more information, please refer to the appropriate Material Safety Data Sheet.

Whilst every care has been taken in the preparation of this information, no warranty is given or implied in connection with any recommendation or suggestion made herein. We reserve the right to modify specifications from time to time without prior notice. The user is advised to conduct his own tests in order to determine the suitability of the product for the intended purpose. All goods are supplied subject to Standard Conditions of Sale which are available upon request.