APP Modified Bitumen Waterproofing Membrane - WB-001

1.Good APP waterproofing membrane, 2.Anti-puncture,anti-erosion,anti-mildew, 3.Excellent quality,reasonable price - details see: https://www.buildingsupplieshub.com/app-modified-bitumen-waterproofing-membrane-10100514

Type: Waterproof Membrane	Place of Origin: Shandong China (Mainland)	Brand Name: Wanbao	Model Number: WB-001
Color: Black/Green/Red/Grey/Yellow	Base: PY/G/PYG	Cover: PE/S/M/PET	Thickness: 2/2.5/3/3.5/4mm
Grade: First/Second	Management Certification: ISO9001.2008,ISO14001:2004	FOB price: US $ 0.9 - 4.9 / Square Meter	Port: Qingdao Port
Minimum Order Quantity: 5000 Square Meter/Square Meters	Supply Ability: 10000 Square Meter/Square Meters per Day

APP Modified Bitumen Waterproofing Membrane


No.	Item		I		II
			PY	G	PY	G
1	Soluble content/(g/m2)≥	3mm	2100
		4mm	2900
		Test		No flame		No flame
2	Heat Resistance	°C	90		105
		≤mm	2
		Test	no flow no dripping
3	Low temperature flexibility/°C		-20		-25
			no crack
4	Impermeability 30minutes		0.3Mpa	0.2MPa	0.3MPa
5	Tension	Maximum/(N/50mm)	500	350	800	500
		Secondly-Maximum
		Test	no crack no apart
6	Elongation	Secondly-Maximum≥	30		40
		Secondly-Maximum≥
7	Oil Leaking	Pieces≤	2

APP uses polyester felt or fiberglass felt as the original source, and APP , APAO, as the modifier ,and covers the insulation materials as polyethylene, sands , or gravels .

Application

1.Basement and roofing of key waterproof engineering , general and civil engineering .

2.Bridge , road, granary, tunnel, park ,swimming pool, sewage purifying pool and others.

3.Especially adapting to the area with strong sunshine or high temperature.

Features

Good ability of anti-aging, anti-alkali, resistant to high temperature. High tensile strength and enlongation, which adapts to the contraction or crack of the base

Application Method

1.Make sure the roof deck smooth ,clean and dry(Moisture<9%),then apply the surface of roof deck homogeneously with a kind bitumen paint till dry to start application.

2.There are two methods in application:

One way is by heating and melting method---Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted (not flowing),then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.

The other way is by cold adhesive method---Pour the cold adhesive homogeneously on the roof deck then roll the membrane to install it to be fully sticked to roof deck.

By heating and melting method and by cold adhesive can be used in alternation in application as requested.

3.After application ,a full serious inspection is required to make sure no air bubble ,no fold,no falling away etc to guarantee the waterproof life.

Packaging Detail:pallet

Delivery Detail:in 15 days after receive the deposit